具有纳米结构的有机-无机笼型硅氧烷齐聚物(POSS)作为强化相的POSS/Sn-3.5Ag复合钎料可有效地改善基体钎料钎焊接头的力学可靠性.在前期试验的基础上,采用差热分析试验的方法分析了POSS质量分数为3％的POSS/Sn-Ag复合钎料中POSS颗粒的熔化特性.结果表明,3％POSS/Sn-Ag复合钎料的熔化温度与Sn-3.5Ag共晶钎料相近,POSS颗粒的加入对其熔化温度影响不大,说明复合钎料在熔化特性上可以满足工艺性能的要求.此外,差热分析计算表明,3％ POSS/Sn-Ag复合钎料在冷却过程中具有更高的表观活化能值,说明POSS强化相可能主要存在于Sn晶粒的晶界处.
参考文献
| [1] | Shi Y W,Tian J,Hao H,et al.Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder[J].Journal of Alloys and Compounds,2008,453(1):180-184. |
| [2] | Yao P,Liu P,Liu J.Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu-xNi composite solder joints on electrolytic Ni/Au metallized substrate[J].Journal of Alloys and Compounds,2008,462 (1-2):73-79. |
| [3] | 邰枫,郭福,刘彬,等.新型纳米结构颗粒增强无铅复合钎料性能[J].复合材料学报,2010,27(2):144-149.Tai Feng,Guo Fu,Liu Bin,et al.Properties of new nanostructured particles reinforced lead-free composite solders[J].Acta Materiae Compositae Sinica,2010,27(2):144-149. |
| [4] | Tai F,Guo F,Xia Z D,et al.Effects of nano-structured particles on microstructure and microhardness of Sn-Ag solder alloy[J].Journal of Materials Science:Materials in Electronics,2010,21(7):702-707. |
| [5] | 刘彬,邰枫,郭福,等.纳米结构强化无铅焊点的力学性能[J].复合材料学报,2009,26(2):11-17.Liu Bin,Tai Feng,Guo Fu,et al.Mechanical properties of lead-free solder joint containing nano-structured reinforcements[J].Acta Materiae Compositae Sinaca,2008,26(2):11-17. |
| [6] | 邰枫,郭福,刘彬,等.等温时效对新型Sn-Ag基复合钎料显微组织和力学性能的影响[J].复合材料学报,2008,25(5):8-13.Tai Feng,Guo Fu,Liu Bin,et al.Microstructure evolution and mechanical properties of Sn-Ag based composite solder joints during isothermal aging[J].Acta Materiae Compositae Sinica,2008,25(5):8-13. |
| [7] | Lee A,Subramanian K N.Development of nano-composite lead-free electronic solders[J].Journal of Electronic Materials,2005,34(11):1399-1407. |
| [8] | Phillips S H,Haddad T S,Tomczak S J.Developments in nanoscience:Polyhedral oligomeric silsesquioxane (POSS)-polymers[J].Solid State and Material Science,2004,8(1):21-29. |
| [9] | Geng H P.Structure/property relationships of polymers containing hybrid nano-filler-polyhedral oligomeric silsesquioxanes (POSS)[D].East Lansing:Michigan State University,2002. |
| [10] | 刘振海.热分析导论[M].北京:化学工业出版社,1991:224-226.Liu Zhenhai.Thermal analysis introduction[M].Beijing:Chemical Industry Press,1991,224-226. |
| [11] | Chen S W,Lin C C,Chen C M.Determination of the melting and solidification characteristics of solders using differential scanning calorimetry[J].Metallurgical and Materials Transactions A,1998,29 (7):1965-1972. |
| [12] | 李伟,龙剑平,沈保罗,等.DSC法研究Mullite/A1-Cu-Mg复合材料及其基体合金的时效析出行为[J].机械工程材料,2002,26(5):12-14.Li Wei,Long Jianping,Shen Baoluo,et al.DSC Study on the age-precipitation behavior of mullite / Al-Cu-Mg composite and its monolithic matrix alloy[J].Materials for Mechanical Engineering,2002,26(5):12-14. |
| [13] | Huang B,Lee N C.Prospect of lead free alternatives for reflow soldering[C]//SPIE Proceedings Series.Chicago:International Symposium on Microelectronics,1999,3906:711-721. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%