运用ProCAST软件对连铸方坯凝固过程进行仿真模拟,同时利用CAFE模块对连铸坯凝固组织进行预测,模拟结晶器有无电磁搅拌条件下连铸坯凝固组织.仿真结果表明,电磁搅拌明显缩小柱状晶区、增大中心等轴晶区;对结晶器有无电磁搅拌条件下实际生产的连铸坯组织对比分析,证明模拟结果与试验结果吻合.
参考文献
| [1] | 周力,侯华,牛晓峰,任巨良.铸造凝固微观组织模拟研究进展[J].铸造技术,2009(06):816-819. |
| [2] | 赵宇辉,程军,侯华,徐宏.凝固过程微观组织数值模拟研究进展[J].中北大学学报（自然科学版）,2006(04):372-376. |
| [3] | 郑艳,梁娜,刘兆武,范黎明,张利平.连铸坯凝固组织的数值模拟[J].连铸,2012(03):8-11. |
| [4] | YAMAZAKI Minoru;NATSUME Yukinobu;HARADA Hironshi et al.Numerical Simulation of Solidification Structure Formation During Continuous Casting in Fe-0.7mass％C Alloy Using Cellular Automaton Method[J].ISIJ International,2006,46(06):903. |
| [5] | GANDIN C A;RAPPAZ A M .Coupled Finite Element-Cellu lar Automation Model for the Prediction of Dendritic Grain Structure in Solidification Processes[J].Acta Metallurgica Et Materialia,1994,42(07):2233. |
| [6] | RAPPAZ M;GANDIN C A .Probabilistic Modeling of Micro structure Formation in Solidification Processes[J].Acta Metallurgica Et Materialia,1993,41(02):345. |
| [7] | NASTAC L;STEFANESCU D M.Stochastic Modeling of Microstructure Formation in Solidification Processes[J].Model Simul Master Sci Eng,1997(05):391. |
| [8] | ZHUMF;KIMJ M;HONGC P .A Modified Cellular Au tomation Model for the Simulation of Dendritic Growth In Solidification of Alloy[J].ISIJ International,2001,41(05):436. |
| [9] | ZHU M F;KIM J M;HONG C P .Modeling of Globular and Dendritic Structure Evolution in Solidification of an Alloy 7mass%SiAlloy[J].ISIJ International,2001,41(09):992. |
| [10] | GANDIN C A;DESBIOLLES J L;RAPPAZ M et al.A Three-Dimensional Cellular Automaton-Finite Element Model for the Prediction of Solidification Grain Structure[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30(12):3153. |
| [11] | ZHANG Hongwei;NAKAJIMA Keiji;Wu Rangqiong et al.Prediction of Solidification Microstructure and Columnar-to-equiaxed Transition of Al-Si Alloy by Two-Dimensional Cellular Automation With "Decentred Square" Growth Algorithm[J].ISIJ International,2009,49(07):1000. |
| [12] | Mingfang ZHU;Shiyan PAN;Dongke SUN .Numerical Simulation of Microstructure Evolution During Alloy Solidification by Using Cellular Automaton Method[J].ISIJ International,2010(12):1851-1858. |
| [13] | 李殿中;苏仕方;徐雪华.镍基合金叶片凝固过程微观组织模拟机工艺优化研究[J].铸造,1997(08):1. |
| [14] | 王同敏 .金属凝固过程微观模拟研究[D].大连理工大学,2000. |
| [15] | 金俊泽;王宗延 .金属凝固组织形成的仿真研究[J].金属学报,1998,34(09):928. |
| [16] | 于靖,许庆彦,崔锴,柳百成.基于一种改进CA模型的微观组织模拟[J].金属学报,2007(07):731-738. |
| [17] | WANG JinLong;WANG FuMing;LI Changrong et al.Simulation of 3D-Microstructure in Free-cutting Steel 9SMn28 under Water Cooling Condition with Cinvection and Porosity[J].ISIJ International,2010,503(02):222. |
| [18] | J. Wang;F. Wang;C. Li;J. Zhang .Simulation of Solidification Microstructure and Columnar to Equiaxed Transition in Freecutting Steel 9SMn28 based on a CAFE Method[J].Steel Research International,2010(2):150-157. |
| [19] | WANG Jinlong;WANG Fuming;ZHAO Yanyu et al.Numerical Simulation of 3D-Microstructure in Solidification Processes Based on a CAFE Method[J].International Jour nal of Minerals Metallurgy and Materials,2009,16(06):640. |
| [20] | Kurza W;Giovanola B;Trivedi R .Theory of Microstructure Development During rapid Solidification[J].Acta Metallurgica,1986,34(05):823. |
| [21] | Hiroshi Harada;Ken-ichi Miyazawa;Tooru Matsumiya;Takashi Morohoshi;Hisao Esaka .Numerical prediction of solidification structure taking account of molten steel flow[J].鉄と鋼,2003(2):265-272. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%