对热气动式微泵进行了热分析,得到了泵室压力与温度场的关系.针对液滴型微PCR芯片中液滴往复运动的需要,在微泵中引入了热电制冷,通过分析,确定热电制冷片应该放置于导热系数较小的玻璃侧和温度应控制在10℃.分析表明,为了实现迅速增压,保持压力稳定,较快降压三阶段的要求,加热过程可设置为,高功率加热一段很短的时间,然后低功率加热持续一段时间,最后停止加热.
参考文献
| [1] | Reyes D R;Iossifidis D;Auroux P A et al.Micro Total Analysis Systems,1 Introduction,Theory,and Technology[J].Analytical Chemistry,2002,74(12):2623-2636. |
| [2] | Wang Wei;Li Zhixin;Yang Yongjun.Droplet Based Micro Oscillating Flow-Through PCR Chip[A].Maastricht,Netherlands:IEEE,2004:280-284. |
| [3] | Bu M;Melvin T;Ensell G et al.Design and Theoretical Evaluation of a Novel Microfluidic Device to be Used for PCR[J].Journal of Micromechanics and Microengineering,2003,13(04):125-130. |
| [4] | Jun Zeng;Tom Korsmeyer .Principles of droplet electrohydrodynamics for lab-on-a-chip[J].Lab on a chip,2004(4):265-277. |
| [5] | Sammarco Timothy S.;Burns Mark A. .Thermocapillary Pumping of Discrete Drops in Microfabricated Analysis Devices[J].AIChE Journal,1999(2):350-366. |
| [6] | Handique K;Burke DT;Mastrangelo CH;Burns MA .On-chip thermopneumatic pressure for discrete drop pumping[J].Analytical chemistry,2001(8):1831-1838. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%