欢迎登录材料期刊网

材料期刊网

高级检索

在围海造陆、航道疏浚、矿浆输送及电厂等领域,大量固体颗粒通过管道输送.在输送过程中管体不仅发生磨损,还承受不同程度的腐蚀,从而使得管体产生严重的磨蚀失效.系统论述了近年来钢铁材料在不同工况条件下,特别是管道输送中磨蚀行为的研究进展,包括磨蚀的失效方式、失效机制、主要的影响因素及相关钢种的研究情况.分析表明:相对浆体输送领域,水力及矿山机械是磨蚀研究的热点.

参考文献

[1] 韩文政.磨损失效分析[J].表面工程,1991(02):18.
[2] Iain Finnie.Some Reflection on the Past and Future of Erosion[J].WEAR,1995(186/187):1.
[3] Finnie Iain;Wolak J;Kabil Y.Erosion of Metals by Solid Particles[J].ASTM J Mater,1967(02):682.
[4] Baker R;Bessaih N .Methods of Reducing the Erosion from Eells in a Concrete Block Spillway[J].Municipal Engineer,1996,118(03):199.
[5] 姜晓霞;李诗卓;李曙.金属的腐蚀磨蚀[M].北京:化学工业出版社,2003
[6] 王荣克 .磨蚀泥沙启动装置的研制与泥沙特性对磨蚀影响的研究[D].南京:河海大学,2007.
[7] Kwoka C T;Manb H C;Leung L K .Effect of Temperature,pH and Sulphide on the Cavitation Erosion Behaviour of Super Duplex Stainless Steel[J].WEAR,1997,211:84.
[8] Karimi A;Lartin M J .Cavitation Erosion of Materials[J].International Metels Reviews,1986,31(01):1.
[9] Haller R;Wollfarth M;Heumer H .Experimental Simulation of Cavitation Erosion in Journal Bearings[J].International Journal of Multiphase Flow,1996,22(01):136.
[10] 陈文革.两种钢的磨蚀失效分析[J].水利电力机械,1999(01):33-36.
[11] Richman R H;Mcnangh Tonw P.Correlation of Cavitation Erosion Behavior With Mechanical Properties of Metals[J].WEAR,1990(140):63.
[12] Odawara O .Long Ceramic-Lined Pipes With High Resistance Against Corrosion Abrasion and Thermal Shock[J].Materials and Manufacturing Processes,1993,8(02):203.
[13] 谷臣清;赵康;亢颖 等.渗氮对钢的气蚀与磨蚀特性的影响[J].金属热处理学报,1997,18(01):32.
[14] Suslick K S;Didenko Y;Fang M M et al.Acoustic Cavitation and Its Chemical Concequences[J].Pllil Trans R Soc Lond A,1999,357:335.
[15] Henthcock C J;Prothcroe B E;Ball A .Cavitation of Stainless Steels[J].WEAR,1982,81:311.
[16] Karl-Heinz;Zum Gahr;Douglas V Doane .Optimizing Fracture Toughness and Abrasion Resistance in White Cast Irons[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1980,11(04):613.
[17] 黎清宁,蒋业华,卢德宏,周荣.湿磨工况下冲击功对高锰钢腐蚀磨损交互作用的影响[J].摩擦学学报,2009(01):75-80.
[18] 曹连喜.论固体物料水力输送中的管道磨损[J].有色金属,1997(04):19.
[19] Wood R J K;Puget Y;Trethewey K R et al.The Performance of Marine Coating and Pipe Materials Under Fliud-Borne Sand Erosion[J].WEAR,1998,219:46.
[20] Rengstorff G W P;Miyoshi K;Buckley D H .Friction and Wear of Iron and Nickel in Sodium-Hydroxide Solutions[J].ASLE TRANSACTIONS,1983,26(04):509.
[21] 罗安贤;朱清澄 .泥浆泵双金属缸套磨损失效机理及其材质匹配试验[J].石油学报,1994,15(04):112.
[22] Olive G.Engel .Mechanism of Material Removal During HighSpeed Drop-Impact Erosion of Pure Aluminum.Materials[J].Science and Engineering,1974,14(02):179.
[23] Pitta C H;Changa Y M;Wadsworth M E et al.Laboratory Abrasion and Eectrochemical Test Methods as a Means of Determining Mechanism and Rates of Corrosion and Wear in Ball Mills[J].Mineral Processing,1988,22(1-4):361.
[24] Hedemeyer J .Influence of the Plastic Deformation of Metals During Mixed Friction on their Chemical Reaction Rate[J].WEAR,1981,66(03):379.
[25] Madsen B W .Measurement of Erosion-Corrosion Synergism With Slurry Wear Test Appratus[J].WEAR,1988,123:127.
[26] Hocke H;Wilkinsona H N .Testing Abrasion Resistance of Slurry Pipeline Materials[J].Tribology International,1978,11(05):289.
[27] 王泾文,陈翌庆.几种新合金的耐磨蚀性能[J].钢铁研究学报,2001(04):34-37.
[28] 郑玉贵.液/固双相流冲刷腐蚀实验装置的研制及动态电化学测试[J].腐蚀科学与防护技术,1993(04):286.
[29] Myung Chul Park;Ki Nam Kim;Gyeong Su Shin;Seon Jin Kim.Effects of strain induced martensitic transformation on the cavitation erosion resistance and incubation time of Fe-Cr-Ni-C alloys[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2012:28-33.
[30] 康进兴;赵文珍;徐英鸽 等.水力机械材料及其防护技术的进展[J].空军工程大学学报,2002,3(03):48.
[31] 王者昌,陈怀宁.新型铬锰氮抗磨蚀用钢的研制和应用[C].第十六次中国水电设备学术讨论会论文汇编,2007:454-464.
[32] Akira Tohyama;Tatsuo Takaoka;Hidetoshi Furukawa .Development of Abrasion-resistant Pipe (NK-SL80) for Slurry Transportation Systems[J].NKK Technical Review,2001(85):16-22.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%