In this study, aluminum alloy (Al-2 wt% Cu) matrix composites reinforced with 1, 2 and 4 wt% boron carbide nanoparticles fabricated through mechanical milling with average size of 100 nm were fabricated via stir casting method at 850°C. Cast ingots of the matrix alloy and the composites were extruded at 500°C at an extrusion ratio of 10:1 to investigate the effects of hot extrusion on the mechanical properties of the composites. The microstructures of the as-cast and the extruded composites were investigated by scanning electron microscopy (SEM). Density measurement, hardness and tensile tests were carried out to identify the mechanical properties of the composites. The extruded samples revealed a more uniform distribution of B4C nanoparticles. Also, the extruded samples had strength and ductility values superior to those of the as-cast counterparts. In the as-cast and the extruded samples, with increasing amount of B4C nanoparticles, yield strength and tensile strength increased but elongation to fracture decreased.
参考文献
| [1] | D.J. Lloyd: Int. Mater. Rev., 1994, 39, 1.[2 ] J.W. Kaczmar, K. Pietrzak and W. Wlosinski: Mater. Process. Technol., 2000, 106, 58.[3 ] T.R. Chapman, D.E. Niesz, R.T. Fox and T. Fawcett: Wear, 1999, 276, 81.[4 ] K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis and L. Froyen: Mater. Process. Technol., 2003, 142, 738.[5 ] G. Fu, L. Jiang, J. Liu and Y. Wang: J. Univ. Sci. Technol. Beijing, 2006, 13, 263.[6 ] A. Mazahery, H. Abdizadeh and H.R. Baharvandi: Mater. Sci. Eng. A, 2009, 518, 61.[7 ] J.B. Fogagnolo, M.H. Robert and J.M. Torralba: Mater. Sci. Eng. A, 2006, 426, 85.[8 ] Y.Q. Liu, H.T. Cong, W. Wang, C.H. Sun and H.M. Cheng: Mater. Sci. Eng. A, 2009, 505, 151.[9 ] H. Zhang, K.T. Ramesh and E.S.C. Chin: Mater. Sci. Eng. A, 2004, 384, 26.[10] H.M. Hu, E.J. Lavernia, W.C. Harrigan, J. Kajuch and S.R. Nutt: Mater. Sci. Eng. A, 2001, 297, 94.[11] D.L. Zhang, J. Liang and J. Wu: Mater. Sci. Eng. A, 2004, 375{377, 911[12] G. Jiang, W. Wu, G.S. Daehn and R.H. Wagoner: Acta Mater., 2000, 48, 4331.[13] I. Kerti and F. Toptan: Mater. Lett., 2008, 62, 1215.[14] R.M. Mohanty, K. Balasubramanian and S.K. Seshadri: Mater. Sci. Eng. A, 2008, 498, 42.[15] A. Alizadeh, E. Taheri-Nassaj and N. Ehsani: Eur. Ceram. Soc., 2004, 24, 3227.[16] J. Ye, J. He and J.M. Schoenung: Metall. Mater. Trans. A, 2006, 37, 3099.[17] J. Onoro, M.D. Salvador and L.E.G. Cambronero: Mater. Sci. Eng. A, 2009, 499, 421.[18] M.A.P. dos Santos and C.A. Costa: Power Technol., 2006, 169, 84.[19] K. Shinohara, B. Golman, T. Uchiyama and M. Otani: Power Technol., 1999, 103, 292.[20] S. Oh, J.A. Cornie and K.C. Russel: Metall. Trans. A, 1989, 20, 533.[21] B.P. Krishnan, M.K. Surappa and P.K. Rohatgi: Mater. Sci., 1981, 16(5), 1209.[22] F. Dellanney, L. Rozen and A. Deryttere: Mater. Sci., 1987, 22, 1.[23] Y.J. Kimura: Mater. Sci., 1984, 19, 3107.[24] B.C. Pai, A.G. Kulkarni, T.A. Bhasker and N. Balasubramanian: Mater. Sci., 1980, 5(7), 1860.[25] J.P. Rocher, J.M. Quenisset and R. Naslain: Mater. Sci. Lett., 1985, 4(12), 1527.[26] J. Hashim, L. Looney and M.S.J. Hashmi: Mater. Process. Technol., 2001, 119, 324.[27] J. Hashim, L. Looney and M.S.J. Hashmi: Mater. Process. Technol., 1999, 92, 1.[28] X.J. Wang, X.S. Hu, K. Wu, K.K. Deng, W.M. Gan, C.Y. Wang and M.Y. Zheng: Mater. Sci. Eng. A, 2008, 492, 481.[29] B. Previtali, D. Pocci and C. Taccardo: Compos. Part A: Appl. Sci. Manuf., 2008, 39, 1606.[30] J.M. Papazian and P.M. Adler: Metall. Trans. A, 1990, 21, 401.[31] M.G. McKimpson and T.E. Scott: Mater. Sci. Eng. A, 1989, 107, 93.[32] F.M. Hosking, F.F. Portillo, R. Wunderlin and R. Mehrabian: Mater. Sci., 1982, 17, 477.[33] T.G. Nieh and R.F. Karlak: Scripta Metall., 1984, 18, 25.[34] S. Suresh, A. Mortensen and A. Needleman: Fundamentals of Metal Matrix Composites, 1st edn, Butterworth-Heinemann, London, 1993, 57.[35] N.H. Kim, C.G. Kang and B.M. Kim: Int. J. Mech. Sci., 2001, 43, 1507.[36] C.G. Kang, N.H. Kim and B.M. Kim: Mater. Process. Technol., 2000, 100, 53.[37] A. Canakci, F. Arslan and I. Yasar: Mater. Sci., 2007, 42, 9536.[38] S. Nagata: Mixing Principles and Applications, Wiley, New York, 1975.[39] A. Daoud and M. Abo-Elkhar: Mater. Process. Technol., 2002, 120, 296.[40] U. Cocen and K. Onel: Comp. Sci. Technol., 2002, 62, 275.[41] A. Pakdel and H. Farhangi: Arab. J. Sci. Eng., 2009, 34, 167.[42] M. Karimi, H.R. Baharvandi, H. Abdizadeh, B. Pak Beyrami and M.A. Mobarhan Bonab: Proc. SPIE, 2007, 6423, 64235Y-1. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%