对于各向异性复合材料结构设计,需要得到必要的弹性常数和强度常数以实现结构设计和准确校核.本文给出了获得弹性常数和强度常数的试验标准,对每个标准的特点和局限性进行了分析,提出了选用标准进行试验的建议.
参考文献
| [1] | 孙敬水.发达国家标准化战略及其对我国的启示[J].科研管理,2005(01):1-8. |
| [2] | 胡中永,张海雁,梁家铭.新材料研发与标准化的有机结合[J].中国标准化,2010(01):10-12. |
| [3] | 李顺林;王兴业.复合材料结构设计基础[M].武昌:武汉工业大学出版社,1996:199. |
| [4] | 美国军用手册MIL-HDBK-17F复合材料手册第一卷聚合物基复合材料结构材料表征指南[M].北京:中国航空综合技术研究所出版,2004:254-282. |
| [5] | GB/T 1447-2005.纤维增强塑料拉伸性能试验方法[S]. |
| [6] | GB/T 3354-1999.定向纤维增强塑料拉伸性能试验方法[S]. |
| [7] | GB/T 1458-2008.纤维缠绕增强塑料环向试样拉伸性能试验方法[S]. |
| [8] | ISO 527-5:2009.Plastics-Determination of tensile properties-Part 5:Test conditions for unidirectional fibre-reinforced plastic composites[S]. |
| [9] | ASTM D3039-07.Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials[S]. |
| [10] | ASTM D2290-00.Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method[S]. |
| [11] | GB/T 3355-2005.纤维增强塑料纵横剪切试验方法[S]. |
| [12] | GB/T 28889-2012.复合材料面内剪切性能试验方法[S]. |
| [13] | ISO 14129:1997.Fibre-reinforced plastic composites--Determination of the in-plane shear stress/shear strain response including the in-plane shear modulus and strength by the plus or minus 45 degree tension test method[S]. |
| [14] | ASTM D3518-07.Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate[S]. |
| [15] | ASTM D5379-12.Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method[S]. |
| [16] | ASTM D4255:01.Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method[S]. |
| [17] | ASTM D5448:06.Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders[S]. |
| [18] | ASTM D7078:05.Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method[S]. |
| [19] | ISO 15310:1999.Fibre-reinforced plastic composites--Determination of the in-plane shear modulus by the plate twist method[S]. |
| [20] | GB/T 1450.1-2005.纤维增强塑料层间剪切强度试验方法[S]. |
| [21] | JC/T 773-2010.纤维增强塑料短梁法测定层间强度[S]. |
| [22] | ISO 14130:1997.Fibre-reinforced plastic composites--Determination of apparent interlaminar shear strength by short-beam method[S]. |
| [23] | GB/T 3856-2005.单向纤维增强塑料平板压缩性能试验方法[S]. |
| [24] | GB/T 5258-2008.纤维增强塑料面内压缩性能试验方法[S]. |
| [25] | ISO 14126:1999.Fibre-reinforced plastic composites--Determination of compressive properties in the in-plane direction[S]. |
| [26] | ASTM D3410-03.Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading[S]. |
| [27] | ASTM D6641-09.Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture[S]. |
| [28] | GB/T 1448-2005.纤维增强塑料压缩性能试验方法[S]. |
| [29] | ASTM D7291:07.Standard Test Method for Through-Thickness Flatwise" Tensile Strength and Elastic Modulus of a FiberReinforced Polymer Matrix Composite Material[S]. |
| [30] | GB/T 4944-2005.玻璃纤维增强塑料层合板层间拉伸强度试验方法[S]. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%