According to the deformation characteristics of three-roll tube rolling,the existent disadvantages of traditional A Geleiyi and A Tselikov's formulas were objectively analyzed.An assumption approximate to actual situation was put forward.After suitable simplification,the energy method was adopted to establish velocity fields for permissive movement in deformed areas,and the calculation formula of average unit pressure for three-roll tube rolling was deduced.The values of theoretical calculation are basically consistent with the measured values of large-scale aluminum tube during on-site rolling process.The results proved that the formula is reasonable.
参考文献
| [1] | Tselikov A.Stress and Strain in Metal Rolling[M].Moscow:MIR Publishers,1967 |
| [2] | LI Lian-shi;HAN Guan-ehang.Production of Small Scaled Seamless Pipe(in Chinese)[M].北京:冶金工业出版社,1989 |
| [3] | SUN Bin-yu.Theories of Strip Casting-Rolling and the Technique(in Chinese)[M].北京:冶金工业出版社,2002 |
| [4] | Sun Binyu;Zhang Hong;Shi Rang .An analysis of casting-rolling force of viscous fluid and its technological influence[J].Steel Research,1995(7):301-304. |
| [5] | SUN Bin-yu;ZHONG Hong;ZHANG Xiao-ping et al.The Establishment of Calculation formula for Casting Rolling Process of the Influence of Technological Factors[J].Transactions of Nonferrous Metals Society of China,1995,5(03):101. |
| [6] | 孙斌煜,苑世剑,张洪,杜艳平,张芳萍.Establishment of mathematical moment model in twin casting rolling rolls[J].中国有色金属学会会刊(英文版),2002(05):970-973. |
| [7] | 流函数法在铸轧变形理论分析中的应用[J].中国有色金属学报,1999(01):115. |
| [8] | Kristian Krabbenhoft;Lars Damkilde .A general non-linear optimization algorithm for lower bound limit analysis[J].International Journal for Numerical Methods in Engineering,2003(2):165-184. |
| [9] | Mohaileb M .Computer Modeling of Complex Metal Forming Processes Using the Upper Bound Elemental Technique and Modified Upper Bound Elemental Technique[D].Saudi Arabia:College of Technology,2004. |
| [10] | XU Si-guang .Research of Force Parameters and Width Expand of Ring With Energy Method[D].太原:太原重型机械学院,1989. |
| [11] | Chin Tarn Kwan .A concave circular parallelepiped element and its application to three-dimensional closed-die forging[J].Journal of Materials Processing Technology,2002(2):203-208. |
| [12] | Ciria H;Peraire J.Computation of Upper and Lower Bounds in Limit Analysis Using Secondorder Cone Programming and Mesh Adaptively[A].Massachusetts Institute of Technology,Cambrideg Press,2004:181. |
| [13] | JING Qun-ping .Study of Cross Rolling for Big Diameter Aluminum Pipe With FEM and Experiment[D].太原:太原重型机械学院,2002. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%