利用数控实验机床和摩擦实验研究AZ31镁合金板料数控热渐进成形时的摩擦和润滑机理.结果表明:镁合金薄板在加热条件下可以实现单点渐进成形；固体润滑膜可分为粘结型和吸附陶瓷型两种;固体石墨和MoS2润滑剂的初始摩擦因数均小于0.12,均可保证热渐进成形件获得良好的内外表面质量,没有任何划痕和裂纹等缺陷;吸附多孔陶瓷型固体润滑膜具有润滑和自润滑作用,固体润滑剂颗粒大小对初始摩擦因数有一定影响；固体BN粉末没有起到润滑作用,不能单独作为热渐进成形用固体润滑剂;当温度小于500℃时,固体石墨和MoS2粉末按一定比例配置的润滑复合喷剂的初始摩擦因数均小于为0.2,且表现出一定的协同作用.
参考文献
| [1] | Shoichiro Yoshihara;Ken-ichi Manabe .Effect of blank holder force control in deep-drawing process of magnesium alloy sheet[J].Journal of Materials Processing Technology,2005(3):579-585. |
| [2] | W.J. Kim;J.D. Park;U.S. Yoon .Superplasticity and superplastic forming of Mg-Al-Zn alloy sheets fabricated by strip casting method[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):197-204. |
| [3] | 于彦东,张凯锋,蒋大鸣,郑海荣,王长丽.轧制镁合金超塑性和超塑胀形[J].中国有色金属学报,2003(01):71-75. |
| [4] | Y. H. Ji;J. J. Park .Formability of magnesium AZ31 sheet in the incremental forming at warm temperature[J].Journal of Materials Processing Technology,2008(1-3):354-358. |
| [5] | G. Ambrogio;L. Filice;G. L. Manco .Warm incremental forming of magnesium alloy AZ31[J].CIRP Annals,2008(1):257-260. |
| [6] | Masaaki Otsu;Yusuke Kai;Kazuki Takashima .Simultaneous Control of Shape and Properties of AZ31 Magnesium Alloy Sheets by Incremental Forming[J].Materials transactions,2008(5):1124-1128. |
| [7] | Qinglai Zhang;Hailing Guo;Fugui Xiao;Lin Gao;A. B. Bondarev;Weidong Han .Influence of anisotropy of the magnesium alloy AZ31 sheets on warm negative incremental forming[J].Journal of Materials Processing Technology,2009(15/16):5514-5520. |
| [8] | Qinglai Zhang;Fugui Xiao;Hailing Guo;Changsheng Li;Lin Gao;Xingwu Guo;Weidong Han;A. B. Bondarev .Warm negative incremental forming of magnesium alloy AZ31 Sheet: New lubricating method[J].Journal of Materials Processing Technology,2010(2):323-329. |
| [9] | 张青来,冯甜甜,肖富贵,郭海玲,李长生,高霖,韩伟东.微弧氧化陶瓷层对AZ31合金板料渐进成形的影响[J].摩擦学学报,2009(06):606-611. |
| [10] | 张青来,肖富贵,郭海玲,高霖,王玉华,Bondarev A B,韩伟东.镁合金板材热渐进成形的实验研究[J].四川大学学报（工程科学版）,2009(05):120-125. |
| [11] | 张青来,肖富贵,郭海玲,高霖,A.B. Bondarev,韩伟东.各向异性对镁合金板材渐进成形的影响及微观组织演变[J].中国有色金属学报,2009(05):800-807. |
| [12] | DUFLOU J R;CALLEBAUT B;VERBERT J;d e BAERDEMAEKER H .Laser assisted incremental forming:formability and accuracy improvement[J].CIRP Annals Manufacturing Technology,2007,56(01):273-276. |
| [13] | Guoqiang Fan;L. Gao;G. Hussain;Zhaoli Wu .Electric hot incremental forming: A novel technique[J].International Journal of Machine Tools & Manufacture: Design, research and application,2008(15):1688-1692. |
| [14] | 范国强,高霖,李万军,孙丰涛.TC4板料电辅助加热数控渐进成形时摩擦和润滑的研究[J].机械科学与技术,2010(02):201-205. |
| [15] | 顾秀娟,王齐华,王金清.多孔氧化铝陶瓷储油材料的摩擦学性能研究[J].摩擦学学报,2004(02):123-127. |
| [16] | 桑可正;金志浩;刘林 .一种新型减摩复合陶瓷的研究[J].摩擦学学报,2002,22(4s):251-254. |
| [17] | 朱成顺,刘育,李长生,宋昌才,范真,丁建宁,杨继昌.纳米K2Ti4O9晶须增强型固体润滑涂层在切削加工中的应用[J].工具技术,2004(06):18-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%