欢迎登录材料期刊网

材料期刊网

高级检索

采用高速电弧喷涂技术在45钢基体上制备了FeCrWNbSiB非晶纳米晶涂层和1Cr18Ni9Ti涂层,采用扫描电镜和X射线衍射仪等对非晶纳米晶涂层的组织结构进行了分析,利用电化学手段对两种涂层的耐腐蚀性能进行研究.结果表明:非晶纳米晶涂层主要由非晶相和a(Fe,Cr)纳米晶相组成,非晶相的体积分数为57.2%,纳米晶平均尺寸为29.2 nm;该涂层呈层状结构,结合紧密,孔隙率为3.8%;与1Cr18Ni9Ti涂层相比,非晶纳米晶涂层的耐腐蚀性能较好.

参考文献

[1] R.Q. Guo;C. Zhang;Q. Chen;Y. Yang;N. Li;L Liu .Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2011(7):2351-2356.
[2] Wang BQ.;Seitz MW. .Comparison in erosion behavior of iron-base coatings sprayed by three different arc-spray processes[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(1):755-761.
[3] Fu Bin-you;He Ding-yong .Effect of heat treatment on the microstructure and mechanical properties of Fe-based amorphous coatings[J].Journal of Alloys and Compounds,2009(2):422-427.
[4] 卢兰志 .铁基非晶合金涂层设计与制备及性能研究[D].北京工业大学,2010.
[5] 郭金花,吴嘉伟,倪晓俊,李德仁,连法增,卢志超.电弧喷涂含非晶相的Fe基涂层的电化学行为[J].金属学报,2007(07):780-784.
[6] Verdon C.;Martin JL.;Karimi A. .A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):11-24.
[7] Yuping Wu;Pinghua Lin;Guozhi Xie;Junhua Hu;Ming Cao .Formation of amorphous and nanocrystalline phases in high velocity oxy-fuel thermally sprayed a Fe-Cr-Si-B-Mn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):34-39.
[8] 陈智慧,严彪,李翔,陈兴.FeSiBC非晶纳米晶合金材料的腐蚀行为研究[J].金属功能材料,2009(06):1-4.
[9] 宋丹,马爱斌,江静华,林萍华,范俊峰,杨东辉.等通道转角挤压超细晶ZL203合金的晶间腐蚀行为[J].机械工程材料,2010(03):27-30.
[10] 李翔,严彪,董鹏.Fe基非晶和纳米晶合金晶化及电化学腐蚀行为[J].电化学,2009(03):269-274.
[11] 陈伯渠,云翠华,邹洪流,严彪.非晶及纳米晶软磁材料耐腐蚀性能的研究现状[J].材料导报,2006(12):113-115.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%