通过分析热轧带钢在层流冷却过程中的能量变化,利用焓法模型建立了热轧带钢通过层流冷却段的能量平衡方程。然后利用相变热力学和相变动力学模型得到热焓,最后采用有限差分求解能量平衡方程,得到层流冷却过程中带钢的温度场和热焓场,该模型的计算结果与实测值符合良好,能够准确地预测带钢冷却后的温度分布,同时明确了冷却过程实际上是带钢能量传递给周围环境的过程,并非温度不断下降的过程。
Through the analysis of the energy flow variation of hot rolled strip during laminar cooling process,energy balance equation was established using enthalpy method.Then enthalpy was obtained using phase transformation thermodynamics and dynamics.At last finite difference method(FDM) method was used to solve the temperature field and enthalpy field of the strip after hot rolled in laminar cooling.Experimental results appear to be in good agreement with the numerical simulation,thus showing the accuracy of the temperature prediction model and making sure that the cooling process is actually the strip energy transferring to surrounding environment rather than the temperature declining process.
参考文献
| [1] | 陈越南;杨晓清 .变时间步长热焓法求解伴有相变的热传导问题[J].东南大学学报,1989,19(01):40. |
| [2] | 李利民,庄春龙,张洪宇,邓安仲,李胜波.焓法模型求解相变传热问题有效性分析[J].后勤工程学院学报,2011(03):58-62,91. |
| [3] | Matthias Kurz;Michael Metzger .Online Calculation and Prediction of the Strip Temperature in a Hot Strip Finishing Mill[J].Steel Research,2003(4):211-219. |
| [4] | C. G. SUN;H. N. HAN;J. K. LEE .A Finite Element Model for the Prediction of Thermal and Metallurgical Behavior of Strip on Run-out-table in Hot Rolling[J].ISIJ International,2002(4):392-400. |
| [5] | 陈水宣 .热轧带钢温度建模和数值模拟[D].浙江大学,2008. |
| [6] | 刘庄;吴肇基.热处理过程的数值模拟[M].北京:科学出版社,1996 |
| [7] | 刘振宇;许云波;王国栋.热轧钢材组织一性能演变的模拟和预测[M].沈阳:东北大学出版社,2004 |
| [8] | Lazel S .Advanced Automation Concept of Runout Table Strip Cooling for Hot Strip and Plate Mills[J].IEEE Transactions on Industry Applications,2001,37(40):1088. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%