采用热等静压(HIP)工艺制备连续碳纤维(CF)增强Al基复合材料。利用扫描电镜、粒度仪和X射线衍射仪表征2A12铝合金粉末形貌、粒度分布和相组成；利用光学显微镜、扫描电镜和能谱仪观察复合材料的显微组织、断口形貌和界面扩散反应特征，并对其主要力学性能进行测试。结果表明：粉末形貌呈球形，粒度主要分布在150~180μm；复合材料致密，界面连接紧密无孔洞缺陷；与基体铝合金材料相比，复合材料的拉伸强度和断后伸长率分别提高5%和54%，断裂方式为脆性断裂；Al基体裂纹起源于粉末颗粒界面，CF/Al界面断口呈现CF拔出和断裂失效形式；CF/Al界面发生元素扩散，界面反应生成Al 4 C 3金属间化合物。
Aluminum matrix composite reinforced with continuous carbon fiber (CF) was manufactured by hot isostatic pressing (HIP). The morphology, grain size distribution and phase of the powders were investigated by scanning electron microscope (SEM), particle analyzer and X-ray diffraction (XRD). The microstructure, fracture surface morphologies and CF/Al interface reaction characteristic were observed by optical microscope (OM), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). The mechanical properties of the composites were also tested. The results indicate that, the powders are nearly spherical, the particle size is mainly 150?180μm;the composites are compact and the interface bonding is tight without porosity defect;compared with the aluminum matrix alloy, the tensile strength and elongation of the composites increase by above 5%and 54%, respectively, and the fracture mechanism is brittle fracture;the fracture of the Al matrix is along the powder interface, carbon fibers are pulled out and fractured in the CF/Al interface zone; the interface of the CF/Al appears element diffusion, and the interfacial reaction product is Al4C3 intermetallic compound.
参考文献
| [1] | 刘孝飞,刘彦强,樊建中,魏少华,马自力,左涛.热等静压制备Sip/Al-Cu复合材料的组织与性能[J].中国有色金属学报,2012(11):3059-3065. |
| [2] | 唐见茂.航空航天材料发展现状及前景[J].航天器环境工程,2013(02):115-121. |
| [3] | 曾凡昌;李成功;于翘.航空航天材料[M].北京:国防工业出版社,2002:23-25. |
| [4] | LANCIN M;MARHIC C .TEM study of carbon fiber reinforced aluminum matrix composites:Influence of brittle phases and interface on mechanical properties[J].Journal of the European Ceramic Society,2000,20(10):1493-1503. |
| [5] | 刘玫潭,蔡旭升,李国强.高性能 SiC 增强 Al 基复合材料的显微组织和热性能[J].中国有色金属学报,2013(04):1040-1046. |
| [6] | 武高辉,张云鹤,康鹏超.Cf+SiCp/Al复合材料的微观组织与力学性能[J].稀有金属材料与工程,2007(z3):328-330. |
| [7] | S. CHAND .Review Carbon fibers for composites[J].Journal of Materials Science,2000(6):1303-1313. |
| [8] | SHENG-HAN LI;CHUEN-GUANG CHAO .Effects of Carbon Fiber/Al Interface on Mechanical Properties of Carbon-Fiber-Reinforced Aluminum-Matrix Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(7):2153-2160. |
| [9] | BUSHBY R S;SCOTT V D .Evaluation of aluminum-copper alloy reinforced with pitch-based carbon fibers[J].Composites Science and Technology,1997,57(01):119-128. |
| [10] | KYONO T;HALL I W;TAYA M .The effect of isothermal exposure on the transverse properties of a continuous fiber metal-matrix composite[J].Journal of Materials Science,1986,21(12):4269-4280. |
| [11] | DAOUD A .Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration[J].Materials Science and Engineering A,2005,391(01):114-120. |
| [12] | LANG Li-hui;YU Si;WANG Gang;HUANG Xi-na, XU Qiu-yu.Microstructure and mechanical properties of 2A12 Al alloy powder reinforced with continuous carbon fibers manufacturedby hot isostatic pressing[A].Islamabad:IEEE,2015:84-88. |
| [13] | Yiping Tang;Lei Liu;Weiwei Li;Bin Shen;Wenbin Hu .Interface Characteristics And Mechanical Properties Of Short Carbon Fibers/al Composites With Different Coatings[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(8):4393-4400. |
| [14] | LIU Z G;MANG X B;CHAI L H;CHEN Y Y .Interface study of carbon fiber reinforced Al-Cu composites[J].Journal of Alloys and Compounds,2010,504(10):512-514. |
| [15] | 黄培云.粉末冶金原理[M].北京:冶金工业出版社,1997:2-3. |
| [16] | 邬军,徐磊,雷家峰,刘羽寅.粉末冶金TA7 ELI合金的制备及其界面反应层[J].中国有色金属学报,2010(z1):299-302. |
| [17] | HUANG Y;RIDLEY N;HUMPHREYS F J;CUI J Z .Diffusion bonding of super plastic 7075 aluminum alloy[J].Materials Science and Engineering A,1999,266(01):295-302. |
| [18] | HSIAO B S;CHEN E J;ISHIDA H.Controlled interphases in composite materials[M].New York:Elsevier Science Publishing Company,1990:613-614. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%