在MTS810试验机上进行了MX246A合金的热压缩试验,获得了不同变形条件下该合金的真应力-真应变曲线,建立了MX246A合金的热加工图.结果表明,Ni3Al基MX246A合金的流变应力随着变形程度的增加先达到峰值应力,之后逐渐降低,趋于稳态流变.在较高的应变速率变形时容易达到稳态流变,在较低的应变速率时,随着应变量从临界应变逐渐增大,流变应力单调递减,并且随着温度的升高,单调递减的速率逐渐增大.真应变量为0.7的MX246A合金的加工图上存在一个安全加工区,对应的温度在1 220℃附近,应变速率在0.001s-1附近.随着真应变量的增大,功率耗散峰值区域逐渐向高温区移动,功率耗散的微观机制随之由动态回复向γ '相的回溶转变.
参考文献
[1] | 张永刚;韩雅芳;陈国良.金属间化合物结构材料[M].北京:国防工业出版社,2001 |
[2] | Bhattacharya B;Ray R K .Deformation Behavior of a Ni3Al (B,Zr) Alloy During Cold Rolling:Part Ⅱ.Microstructural and Textural Changes[J].Metallurgical and Materials Transactions,2000,31A(12):3011. |
[3] | Sikka V K;Mavity J T;Anderson K .Processing of Nickel Aluminides and Their Industrial Applications[J].Materials Science and Engineering,1992,153A(01):712. |
[4] | Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy[J].Intermetallics,2000(9/11):987-995. |
[5] | Brand A J;Karhauson K;Kopp R .Microstructural Simulation of Nickel Base Alloy Inconel718 in Production of Turbine Disks[J].Materials Science and Technology,1996,12(11):963. |
[6] | Park Nho-Kwang;Yoem Jong Taek;Na Young-Sang .Characterization of Deformation Stability in Hot Forging of Conventional Ti-6Al-4V Using Processing Maps[J].Journal of Materials Processing Technology,2002,130(S.I):540. |
[7] | 李德富,吾志岗,郭胜利,郭青苗,彭海健,胡捷.GH625镍基合金高温塑性变形加工图研究[J].稀有金属材料与工程,2012(06):1026-1031. |
[8] | 周舸,韩寅奔,曲敬龙,丁桦.U720Li镍基高温合金不同失稳判据的热加工图[J].东北大学学报:自然科学版,2012(05):702-706. |
[9] | 张仁鹏,李付国,王晓娜.FGH96合金的热变形行为及其热加工图[J].西北工业大学学报,2007(05):652-656. |
[10] | 王辉,汤慧萍,刘咏,王建,贺卫卫,杨广宇.铸造TiAl基合金的热变形行为及加工图[J].粉末冶金材料科学与工程,2012(04):401-407. |
[11] | Y. V. R. K. Prasad;T. Seshacharyulu .Modelling of hot deformation for microstructural control[J].International Materials Reviews,1998(6):243-258. |
[12] | Y. V. R. K. Prasad .Processing Maps: A Status Report[J].Journal of Materials Engineering and Performance,2003(6):638-645. |
[13] | Sneddon I N;Hill R.Progress in Solid Mechanics[M].Amsterdam:North-Holland Publishing Company,1965 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%