欢迎登录材料期刊网

材料期刊网

高级检索

借助光学显微镜(0M)、透射电镜(TEM)及电化学实验等方法研究了退火工艺对深冷轧制AISI310S奥氏体不锈钢显微组织和耐蚀性能的影响.结果表明:退火温度小于700 ℃,深冷变形组织处于回复阶段,退火温度大于700℃,深冷变形组织处于再结晶阶段,再结晶晶粒尺寸处于亚微米量级;随着退火温度增大至1000℃后,再结晶晶粒明显长大至2μm左右.极化曲线测试结果表明,与深冷变形奥氏体不锈钢相比,经退火处理后奥氏体不锈钢具有更高的自腐蚀电位,更低的腐蚀电流密度和更好的抗腐蚀性能.

参考文献

[1] Ali Hedayati;Abbas Najafizadeh;Ahmad Kermanpur;Farnoosh Forouzan.The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel[J].Journal of Materials Processing Technology,20108(8):1017-1022.
[2] T. FURUHARA;T. MIZOGUCHI;T. MAKI.Ultra-fine {alpha+theta} duplex structure formed by cold rolling and annealing of pearlite[J].ISIJ International,20053(3):392-398.
[3] R. Ueji;N. Tsuji;Y. Minamino.Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite[J].Acta materialia,200216(16):4177-4189.
[4] 贾海龙;张海涛;艾峥嵘;崔建忠.退火温度对深冷轧制6063铝合金组织性能的影响[J].热加工工艺,2013(22):159-162,166.
[5] P. Das;R.Jayaganthan;I.V. Singh.Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy[J].Materials & design,20113(3):1298-1305.
[6] Young Bum Lee;Dong Hyuk Shin;Kyung-Tae Park;Won Jong Nam.Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature[J].Scripta materialia,20044(4):355-359.
[7] Nikhil Rangaraju;T. Raghuram;B. Vamsi Krishna;K. Prasad Rao;P. Venugopal.Effect of cryo-rolling and annealing on microstructure and properties of commercially pure aluminium[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):246-251.
[8] Wang Y;Chen M;Zhou F;Ma E.High tensile ductility in a nanostructured metal.[J].Nature,20026910(6910):912-915.
[9] S. Nagarjuna;U. Chinta Babu;Partha Ghosal.Effect of cryo-rolling on age hardening of Cu-1.5Ti alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):331-337.
[10] 熊毅;贺甜甜;郭志强;陈正阁;张凌峰;任凤章.不同温度重度变形及退火对工业纯铝组织的影响[J].材料热处理学报,2011(9):63-66.
[11] 张坤;王卫国;方晓英;郭红.不同温度轧制Pb-Ca-Sn-Al合金高温退火后的晶界特征分布[J].金属学报,2008(6):652-658.
[12] Hamada AS;Karjalainen LP;Somani MC.Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20061-2(1-2):211-217.
[13] Z.J. Zheng;Y. Gao;Y. Gui;M. Zhu.Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing[J].Corrosion Science,2012Jan.(Jan.):60-67.
[14] 张岩;季长富.钴元素对304不锈钢电化学行为的影响[J].天水师范学院学报,2013(5):11-14.
[15] SONG Dan;MA Ai-bin;JIANG Jing-hua;LIN Pin-hua;YANG Dong-hui.Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP[J].中国有色金属学报(英文版),2009(05):1065-1070.
[16] A. Balyanov;J. Kutnyakova;N. A. Amirkhanova;V. V. Stolyarov;R. Z. Valiev;X. Z. Liao;Y. H. Zhao;Y. B. Jiang;H. F. Xu;T. C. Lowe.Corrosion resistance of ultra fine-grained Ti[J].Scripta materialia,20043(3):225-229.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%