研究了一种在特殊条件下使用的电磁透波功能复合材料结构,并对制成的电磁透波罩成品进行了结构承压能力有限元分析、抗压性能和透波性能检测.检测结果表明,该制品结构能承受3MPa的均匀压力,透波率达85%以上,满足使用要求.
A kind of electromagnetic wave-transmitting composites and structural design was introduced in this paper. The structure was used in specifically condition. The finished product was analysed by FEM and the ca-pabality of resisting press and electromagnetic wave-transmitting were inspected. The results indicats that the structure can endure 3MPa uniformity pressure. It's efficiency of wave-transmitting can reach 85 %. The struc-ture can sastify the demand.
参考文献
| [1] | 李金刚,曹茂盛,张永,林海波.国外透波材料高温电性能研究进展[J].材料工程,2005(02):59-62. |
| [2] | 夏文干,韩养军,杨洁,解海峰.高功率高透波材料的研究[J].高科技纤维与应用,2003(02):39-43. |
| [3] | 高建军,靳武刚.透波性混杂纤维复合材料性能研究[J].电子工艺技术,2000(06):268-270. |
| [4] | 齐共金,张长瑞,胡海峰,曹峰,王思青,曹英斌,姜勇刚.陶瓷基复合材料天线罩制备工艺进展[J].硅酸盐学报,2005(05):632-638. |
| [5] | 余燕飞,党智敏,徐海萍.钛酸钡/环氧树脂复合材料的制备及其介电性能的研究[J].功能材料,2007(09):1478-1480,1486. |
| [6] | Wiltshire MCK.;Shamonina E.;Young IR.;Solymar L. .Dispersion characteristics of magneto-inductive waves: comparison between theory and experiment[J].Electronics Letters,2003(2):215-217. |
| [7] | Li Lewei;Leong Mookseng;Yeo Tatsoon et al.[J].IEEE Transactions on Antennas and Propagation,2002,50(11):1525-1560. |
| [8] | 刘顺华;刘军民;董星龙.电磁波屏蔽及吸波材料[M].北京:化学工业出版社,2007 |
| [9] | 张乐,李玉莹.双波段夹层天线罩平板的应用研究[J].现代防御技术,2007(05):124-129. |
| [10] | 高军,曹祥玉.C波段机载干扰机天线罩的分析与设计[J].现代雷达,2000(01):66-70. |
| [11] | 王维,刘永琪,张小兵,刘芳芳,敬辉.纤维增强树脂基复合材料透波板的研制和试验[J].玻璃钢/复合材料,2008(02):26-29. |
| [12] | 周平,吴承伟,于平.燃料电池编织复合材料侧板的力学分析[J].中国机械工程,2005(22):2056-2060. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%