综述了多孔氮化硅陶瓷材料的国内外研究现状和进展,介绍了多孔氮化硅陶瓷的主要制备方法,分析了微观组织对多孔氮化硅陶瓷力学性能的影响,并与其他多孔陶瓷进行了性能比较,最后展望了多孔氮化硅陶瓷的发展前景.
参考文献
[1] | Chihiro Kawai;Akira Yamakawa .Effect of porosity and microstructre on the strength of Si_3N_4: designed microstructure for high strength, high thermal shock resistance, and facile machining[J].Journal of the American Ceramic Society,1997(10):2705-2708. |
[2] | Shigegaki Y.;Hirao K.;Toriyama M.;Kanzaki S.;Brito ME. .STRAIN TOLERANT POROUS SILICON NITRIDE[J].Journal of the American Ceramic Society,1997(2):495-498. |
[3] | Inagaki Y;Shigegaki Y;Ando M et al.Synthesis and evaluation of anisotropic porous silicon nitride[J].Journal of the European Ceramic Society,2004,24(02):197-200. |
[4] | Diaz A;Hampshire S .Characterisation of porous silicon nitride materials[J].Journal of the European Ceramic Society,2004,24:413-419. |
[5] | Miyagawa N;Shinohara N .Fabrication of porous alumina ceramics with uni-directionally-arranged continuous pores using s magnetic field[J].Journal of the Ceramic Society of Japan,1999,107:673-677. |
[6] | Jian-Feng Yang;Guo-Jun Zhang;Naoki Kondo .Synthesis of Porous Si_3N_4 Ceramics with Rod-Shaped Pore Structure[J].Journal of the American Ceramic Society,2005(4):1030-1032. |
[7] | Xipeng Pu;Xuejian Liu;Fagui Qiu .Novel Method To Optimize the Structure of Reticulated Porous Ceramics[J].Journal of the American Ceramic Society,2004(7):1392-1394. |
[8] | Takayuki Fukasawa;Motohide Ando;Tatsuki Ohji .Synthesis of Porous Ceramics with Complex Pore Structure by Freeze-Dry Processing[J].Journal of the American Ceramic Society,2001(1):230-232. |
[9] | Jian-Feng Yang;Guo-Jun Zhang;Tatsuki Ohji .Fabrication of Low-Shrinkage, Porous Silicon Nitride Ceramics by Addition of a Small Amount of Carbon[J].Journal of the American Ceramic Society,2001(7):1639-1641. |
[10] | 张雯,王红洁,张勇,金志浩.凝胶注模工艺制备高强度多孔氮化硅陶瓷[J].无机材料学报,2004(04):743-748. |
[11] | Kondo N;Suzuki Y;Yang J F et al.Porous silicon nitride-based ceramics fabricated from silicon and carbon powders[J].Journal of Materials Science Letters,2001,20:461-463. |
[12] | Naoki Kondo;Yoshikazu Suzuki;Tastsuki Ohji .High-strength porous silicon nitride fabricated by the sinter-forging technique[J].Journal of Materials Research,2001(1):32-34. |
[13] | Jian-Feng Yang;Guo-Jun Zhang;Tatsuki Ohji .Porosity and microstructure control of porous ceramics by partial hot pressing[J].Journal of Materials Research,2001(7):1916-1918. |
[14] | Shan, SY;Yang, JF;Gao, JQ;Zhang, WH;Jin, ZH;Janssen, R;Ohji, T .Porous silicon nitride ceramics prepared by reduction-nitridation of silica[J].Journal of the American Ceramic Society,2005(9):2594-2596. |
[15] | Kondo N.;Inagaki Y.;Suzuki Y.;Ohji T. .Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):26-31. |
[16] | Kondo N;Suzuki Y;Ohji T .High-strength porous silicon nitride by partial sinter-forging[J].Key Engineering Materials,2003,247:219-222. |
[17] | Yang J F;Deng Z Y;Ohji T .Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive[J].Journal of the European Ceramic Society,2003,23:371-378. |
[18] | Coble R L;Kingery W D .Effect of Porousity on Physical Properties of Sintered Alumina[J].Journal of the American Ceramic Society,1956,39(11):377-385. |
[19] | Weiguang Chi;Dongliang Jiang;Zhengren Huang .Sintering behavior of porous SiC ceramics[J].Ceramics International,2004(6):869-874. |
[20] | Jian-Feng Yang;Guo-Jun Zhang;Naoki Kondo;Tatsuki Ohji .Synthesis and properties of porous Si_3N_4/SiC nanocomposites by carbothermal reaction between Si_3N_4 and carbon[J].Acta materialia,2002(19):4831-4840. |
[21] | K. Kaneko;N. Honbe;M. Matsumoto .Triple-layered, thick glassy grain boundaries in porous cordierite ceramics[J].Acta materialia,2002(3):597-604. |
[22] | Jian-Feng Yang;Guo-Jun Zhang;Naoki Kondo .Porous 2H-Silicon Carbide Ceramics Fabricated by Carbothermal Reaction between Silicon Nitride and Carbon[J].Journal of the American Ceramic Society,2003(6):910-914. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%