在立式离心场下和重力场下对石墨型钛合金铸件在铸造过程的充填及凝固情况进行研究.结果表明:在立式离心场下钛合金熔体的铸造性能好,其流动性和充填性得到很大改善;尤其对3 mm壁厚薄壁件,在重力场下由于充填阻力大于充填力,合金熔体无法完全充填铸型,而在离心场下可以实现全部充填,且最小壁厚可达到0.3 mm.此外,离心场下由于离心力和科氏力的共同作用,铸件的缺陷明显减少,且随铸型转速的增加而不断减小.
参考文献
| [1] | Gorynin, IV .Titanium alloys for marine application[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,1999(2):112-116. |
| [2] | Boyer R R .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,213:103. |
| [3] | Leyens C;Peters M;陈振华.钛与钛合金[M].北京:化学工业出版社 |
| [4] | 南海,谢成木.国外铸造钛合金及其铸件的应用与发展[J].中国铸造装备与技术,2003(06):1-3. |
| [5] | Schutz RW.;Watkins HB. .Recent developments in titanium alloy application in the energy industry[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):305-315. |
| [6] | Lian Z.;Luo GZ. .Research and development of titanium in China[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):294-298. |
| [7] | Bania P J;Hutt A J;Adams R E.[A].Warrendale:TMS,1993:2787. |
| [8] | Thilo Brenner;Thomas Glatzel;Roland Zengerle.[A].北京,2003:903. |
| [9] | Eylon D;Keller M M;Jones P E.[J].Intermetallics,1998(06):703. |
| [10] | Watanabe K;Miyakawa O;Takada Y;Okuno O;Okabe T .Casting behavior of titanium alloys in a centrifugal casting machine.[J].Biomaterials,2003(10):1737-1743. |
| [11] | Liu K;Ma Y C;Gao M et al.[J].Inermetallics,2005,13:925. |
| [12] | Choudhury A.;Blum M. .ECONOMICAL PRODUCTION OF TITANIUM-ALUMINIDE AUTOMOTIVE VALVES USING COLD WALL INDUCTION MELTING AND CENTRIFUGAL CASTING IN A PERMANENT MOLD[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,1996(6):829-831. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%