本文在8根水力直径均为186ìm的硅微平行通道的入口端加工了限制装置,抑制了通道间的相互作用,得到了稳定的气液两相流动,并借助于可视化技术,揭示了通道内部不同区段典型的流型特点.分析了经过通道的压降和局部换热系数的变化规律,并用经验关系式和试验结果进行了比较.
参考文献
| [1] | D. Brutin;F. Topin;L. Tadrist .Experimental study of unsteady convective boiling in heated minichannels[J].International Journal of Heat and Mass Transfer,2003(16):2957-2965. |
| [2] | Wu H Y;Cheng P .Boiling Instability in Parallel Silicon Microchannels at Difierent Heat Flux[J].International Journal of Heat and Mass Transfer,2004,47(17-18):3631-3641. |
| [3] | Hetsroni G;Mosyak A;Pogrebnyak E;Segal Z .Explosive boiling of water in parallel micro-channels[J].International Journal of Multiphase Flow,2005(4):371-392. |
| [4] | Weilin Qu;Issam Mudawar .Measurement and prediction of pressure drop in two-phase micro-channel heat sinks[J].International Journal of Heat and Mass Transfer,2003(15):2737-2753. |
| [5] | S G Kandlikar .A General Correlation for Saturated Two Phase Boiling Heat Transfer Inside Horizontal and Vertical Tubes[J].Journal of Heat Transfer,1990,112(01):219-228. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%