The effects of Cr and Cr/Mn combined additions on the semi-solid microstructure of wrought Al-Mg-Si alloys are investigated. In the Cr-added alloy, the Al7Cr compound is formed with homogeneously distributed in the α-Al matrix after homogenization. Both of the Al7Cr and α-Al12Mn3Si2 dispersiod particles are found in the homogenized microstructure of the Cr/Mn-added alloy. In the semi-solid microstructures, the smallest α-Al grains are obtained in the 60% cold-rolled alloys. After prolonged holding time, the α-Al grain size of the Cr/Mn-added alloy is smaller than that of the Cr-added alloy. Heavy deformation by cold-rolling accelerates spheroidization of the α-Al grains. The D-SSF process is found to be useful to modify the microstructures of both the Cr-added and Cr/Mn-added Al-Mg-Si alloys.
参考文献
| [1] | D. Liu;H.V. Atkinson;P. Kapranos;W. Jirattiticharoean;H. Jones .Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):213-224. |
| [2] | H E Pitts;H V Atkinson.[A].Colorado,USA,1998:97-104. |
| [3] | G C Gullo;K Steinhoff;P J Uggowitzer .[J].Materials Science Forum,2002,331-337:235. |
| [4] | M. Paes;E.J. Zoqui .Semi-solid behavior of new Al-Si-Mg alloys for thixoforming[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):63-73. |
| [5] | W. Eidhed;C. Limmaneevichitr;H. Tezuka .The Development of New Al-Mg-Si Alloys for Thixoforming[J].Materials Science Forum,2006(Pt.1):377-382. |
| [6] | W Eidhed;C Limmaneevichitr;H Tezuka;T Sato.[A].,2006:103. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%