根据相似理论,以国内某厂80t单嘴精炼炉1:4的水模型模拟了单嘴精炼炉吹气流量、吹气位置等工艺参数对混匀时间的影响.在水模型研究的基础上,通过数学模型仿真计算分析了不同吹气流量、吹气位置对单嘴精炼炉内流场的影响,数值计算结果与试验结果吻合较好.研究结果表明:吹气流量为6L/min、吹气位置γ/R为0.5范围内有利于缩短混匀时间.
参考文献
| [1] | 大连钢厂、北京钢铁学院真空吹氩试验小组.单咀插入式真空吹氩试验结果[J].特殊钢,1978(01):5. |
| [2] | Hiroyuki Aoki;Shin-ya Khamura;Ken-ichiro Miyamoto.Development of New Secondary Refining Process Named REDA (Revolutionary Degassing Activator)[A].Warrendale:Iron and Steel Society,1999:351. |
| [3] | S.Kitamura;H.Aoki .Development of a Novel Degassing Process Consisting with Single Large Immersion Snorkel and a Bottom Bubbling Ladle[J].ISIJ International,2000(5):455-459. |
| [4] | 成国光;张鉴;杨念祖 等.单嘴精炼炉轴承钢脱氧的动力学模型[J].特殊钢,1994,15(05):22. |
| [5] | 营野浩至;新饲昭男;加藤胜彦 等.Development of New Type Vacuum Degasser (REDA)-4[J].Current Advancements in Molecular Medicines,1999,12:747. |
| [6] | Launder B E;Spalding D B.The Numerical Computation of Turbulent Flows[J].Computer Methods in Applied Mechanics and Engineering,1974(03):269. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%