The metallographic observation and analyses of TiAl alloy cast ingots revealed that the preferably arranged γ/α_2 lamellar microstructure can be obtained in columnar dendritic cast ingot through controlling the Ti/Al atomic ratio. The experiments conf irmed that the preferably arranged γ/α_2 lamellar microstructure has excellent tensile strength and fracture toughness and tolerant tensile plasticity when the stress is applied parallel to the γ/α_2 interface.Based on these results and the working condition of the turbine blades,a component-specific alloy design has been suggested.
参考文献
| [1] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%