运用平均流动模型求解混合润滑轧制变 形区入口膜厚问题时, 提出了混 合因子m, 它综合了流动因子x和接触因子c对入口膜厚的影响, 简化了轧制润滑模型。 计算和实验表明, 在流体润滑条件下, 表 面粗糙效 应对 形膜亦有一定的影响, 也即混合因子m还适用于流体润滑轧制, 且修正了未考虑 表面粗糙效应而引起的不足。
A mixed factor is developed to determine the in let film thickness when the average flow model is applied in the mixed-lubricat ion rolling process. It com bines the effects of the flow factor and the contact factor, and simplifies the lubrication model of rolling. The calculated and experimental r esults show that surface roughness affects the film thickness even in the hydrodynamic lubrication rolling. So the mixed factor is not only applied to the mixed-lubrication rolling but also in the hydrodynamic lubrication rolling.
参考文献
[1] | Wilson W R D;Walowit J .An isothermal hydrodynamic the ory for strip rolling with front and back tension[J].Institute of Mechanical Engineers,1971,184(18):169-172. |
[2] | Mizuno T J .An experimental research on cold rolling[J].Japan Society of Technology Plasticity,1966,7:383-389. |
[3] | Sargent L B;Taso Y H .Surface roughness considerations in metalworki ng[J].ASLE Transactions,1980,23(01):70-76. |
[4] | Schey J A.Surface roughness effect in metalworking[J].Lubrication Engineering,1983(06):276-283. |
[5] | Prakash J;Czichos H .Influence of surface roughness and its orie ntat ion on partial elastohydrodynamic lubrication of rollers[J].ASME Journal of Lubrication Engineering,1983,105(04):591-597. |
[6] | Patir N;Cheng H S .An average flow model for determining effects of three dim ensional roughness on partial hydrodynamic lubrication[J].ASEM J of Lubr Tec h,1978,100(01):12-17. |
[7] | Patir N;Cheng H S .Application of average flow model to lu brication between rough sliding surface[J].ASME Journal of Lubrication Technology,1979,101(04):220-230. |
[8] | Wu C W;Zheng L Q .An average reynolds equation for par tial film lubri cation with a contact factor[J].Journal of Tribology,1989,111(01):188-191. |
[9] | 吴承伟;郑林庆.接触因子及其在研 究部分流体润滑中的应用[J].润滑与密封,1989(03):1-6. |
[10] | Shen S;Wilson W R D .Mixed lubrication of strip rolling[J].STLE Tribology Transactions,1994,37(03):383-349. |
[11] | 孙建林,张新明,博祖铸.冷轧润滑过程中摩擦的控制[J].中国有色金属学报,1997(03):104-107. |
[12] | 毛大恒.铝及铝合金电磁连铸轧新技术--电磁场对金属凝固的作用机理[J].矿冶工程,1996(02):68. |
[13] | 毛大恒;钟 掘;陈欠根 .电磁铸轧工业试验研究[J].中南工业大学学报(自然科学版),1995,26(Z1):89-94. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%