为优化挤压工艺和模具结构,降低H13钢制分流模的疲劳失效率,通过热压缩试验及力学性能测试,建立了H13钢的本构方程和应变一低周疲劳寿命关系,结合FEM提出了一种预测H13钢制分流模低周疲劳寿命的方法;应用此法分析了工艺和结构参数对模具疲劳寿命的影响,结果表明:疲劳寿命随着挤压速度的增加而减小,随着模桥根部圆角半径的增大而增大,而结构参数为影响疲劳寿命的关键.最后通过实际生产验证了该方法的可靠性.
参考文献
| [1] | A. F. M. Arif;A. K. Sheikh;S. Z. Qamar .A study of die failure mechanisms in aluminum extrusion[J].Journal of Materials Processing Technology,2003(3):318-328. |
| [2] | Sheikh A K;Arif A F M;Qamar S Z .A Probabilistic Study of Failures of Solid and Hollow Dies in Hot Aluminum Extrusion[J].Journal of Materials Processing Technology,2004,155-156(30):1740. |
| [3] | Spoormaker J L .The Role of Failure Analysis in Establishing Design Rules for Reliable Plastic Products[J].Microelectronics Reliability,2008,35(9-10):1275. |
| [4] | 徐灏.疲劳强度[M].北京:高等教育出版社,1988 |
| [5] | Veronique Garat;Gerard Bernhart;Laurence Hervy .Influence of design and process parameters on service life of nut hot forging die[J].Journal of Materials Processing Technology,2004(3):359-369. |
| [6] | LIN Y C;CHEN M G;ZHONG J .Effect of Temperature and Strain Rate on Compressive Deformation Behavior of 42CrMo Steel[J].Journal of Materials Processing Technology,2008,205(1-3):308. |
| [7] | CHEN Si-ying;HUANG Chen-guang;WANG Chun-kui et al.Constitutive Modeling for Elevated Temperature Flow Behavior[J].Computational Materials Science,2008,42(03):470. |
| [8] | 林高用,郑小燕,冯迪,杨伟,张胜华.热处理状态对H13模具钢渗氮层的影响[J].钢铁,2008(12):63-66. |
| [9] | 王孟君,杨立斌,甘春雷,彭大暑.6063铝合金高温流变本构方程[J].华中科技大学学报(自然科学版),2003(06):20-22. |
| [10] | 西田正孝.应力集中[M].北京:机械工业出版社,1973 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%