研究了Nb-Ti-Al高温合金的静态再结晶行为及晶粒长大行为,并通过实验得出了再结晶动力学和晶粒长大方程.结果表明:冷轧变形后,合金在880～1000℃进行退火处理,可获得均匀、细小的晶粒,再结晶晶粒体积分数与退火时间的关系可用Avrami方程进行描述.随着冷轧变形量的增加,再结晶激活能逐渐减小,其范围为274.05 ～ 198.45 kJ/mol.在850 ～1000℃的温度范围内,研究了加热温度和时间对合金晶粒尺寸变化的影响.
参考文献
| [1] | 难熔金属文集(第一分册)[M].上海:上海情报研究所,1976 |
| [2] | Loria E A;Carneiro T;Stuart H.Processing capability of structural intermetallics and Nb-Ti-Al alloys via plasma arcmelting[A].TMS:Warrendale:PA,1993:669-706. |
| [3] | Sikka V K;Loria E A .Characteristics of a multicomponent Nb-Ti-Al alloy viaindustrial-scale practice[J].Materials Science and Engineering A,1997,239-240:745-751. |
| [4] | Rengen Ding;Huisheng Jiao;Ian P. Jones.Effect of Mo on mechanical properties and microstructure of Nb–Ti–C alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008:199-202. |
| [5] | Allameh SM.;Hayes RW.;Loria EA.;Soboyejo WO. .Creep behavior in an extruded beta solid solution Nb-Ti base alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):856-862. |
| [6] | Keith J Leonard;Joseph C Mishurda;Vijay K Vasudevan .Phase equilibria at 1100 ℃ in the Nb-Ti-Al system[J].Materials Science and Engineering A,2002,329-331:282-288. |
| [7] | GB/T 6394-2002.金属平均晶粒度测定方法[S].北京:中国标准出版社 |
| [8] | 黄启今,刘国权.通用软件Microsoft Word在显微组织定量分析中的应用[J].中国体视学与图像分析,2002(03):182-184. |
| [9] | 李松瑞;周善初.金属热处理[M].长沙:中南大学出版社,2003:58. |
| [10] | 彭聪辉,常辉,胡锐,樊江昆,柏广海,傅恒志.Haynes230高温合金的静态再结晶动力学[J].航空材料学报,2011(02):8-12. |
| [11] | 陈礼清,隋凤利,刘相华.Inconel 718合金方坯粗轧加热过程晶粒长大模型[J].金属学报,2009(10):1242-1248. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%