使用密炼机对木纤维(WF)进行酯化改性,将改性木纤维(EWF)与高密度聚乙烯(HDPE)、过氧化二异丙苯(DCP)混合,再用双螺杆挤出机反应挤出制备EWF/H DPE复合材料.使用FTIR、力学性能测试、SEM、广角X射线衍射(WAXD)和示差扫描量热-热重同步热分析(TG-DSC)研究了EWF/HDPE复合材料的微观结构和物理力学性能.结果表明,在密炼机中对WF的酯化改性成功地在WF表面引入了酯基;反应挤出所得EWF/HDPE复合材料与无增容WF/HDPE复合材料相比,其冲击和拉伸强度最大分别提高了112%和36%,EWF与HDPE两相之间的界面粘合明显改善,HDPE的晶粒尺寸有所增加,结晶度也有较大提高,但热稳定性有少许下降.EWF/HDPE复合材料力学性能的提高主要归因于反应挤出的增容作用,而非基体HDPE结晶结构的变化.
参考文献
[1] | Kalia S,Kaith B S,Kaur I.Pretreatments of natural fibers and their application as reinforcing material in polymer composites-A review[J].Polymer Engineering and Science,2009,49(7):1253-1272. |
[2] | Tronc E,Hernández-Escobar C A,Ibarra-Gómez R,et al.Blue agave fiber esterification for the reinforcement of thermoplastic composites[J].Carbohydrate Polymers,2007,67(2):245-255. |
[3] | Müller M,Radovanovic I,Grüneberg T,et al.Influence of various wood modifications on the properties of polyvinyl chloride/wood flour composites[J].Journal of Applied Polymer Science,2012,125(1):308-312. |
[4] | Marcovich N E,Aranguren M I,Reboredo M M.Modified woodflour as thermoset fillers Part Ⅰ:Effect of the chemical modification and percentage of filler on the mechanical properties[J].Polymer,2001,42(2):815-825. |
[5] | Ibrahim M M,Dufresne A,El-Zawawy W K,et al.Banana fibers and microfibrils as lignocellulosic reinforcements in polymer composites[J].Carbohydrate Polymers,2010,81(4):811-819. |
[6] | Gunning M A,Istrate O M,Geever L M,et al.The effect of maleic anhydride grafting efficiency on the flexural properties of polyethylene composites[J].Journal of Applied Polymer Science,2012,124(6):4799-4808. |
[7] | 李永峰,刘一星,于海鹏,等.甲基丙烯酸缩水甘油酯改善木塑复合材料性能[J].复合材料学报,2009,26(5):1-4.Li Yongfeng,Liu Yixing,Yu Haipeng,et al.Property improvement of wood polymer composites with glycidyl methacrylate[J].Acta Materiae Compositae Sinica,2009,26(5):1-4. |
[8] | 赵永生,王克俭,朱复华,等.蒙脱土/硅烷改性木粉/PVC复合材料[J].复合材料学报,2007,24(3):63-71.Zhao Yongsheng,Wang Kejian,Zhu Fuhua,et al.Properties of montmorillonite/ silane-modified wood flour/ PVC composites[J].Acta Materiae Compositae Sinica,2007,24(3):63-71. |
[9] | Nourbakhsh A,Ashori A.Fundamental studies on wood-plastic composites:Effects of fiber concentration and mixing temperature on the mechanical properties of poplar/PPcomposite[J].Polymer Composites,2008,29(5):569-573. |
[10] | Srebrenkoska V,Gaceva G B,Avella M,et al.Recycling of polypropylene-based eco-composites[J].Polymer International,2008,57(11):1252-1257. |
[11] | Shi H C,Li B,Chen C,et al.Preparation of HDPE/SEBS-g-MAH and its effect on mechanical properties of HDPE/wood flour composites[J].Journal of Applied Polymer Science,2007,104(5):3161-3170. |
[12] | Nachtigall S M B,Cerveira G S,Rosa S M L.New polymericcoupling agent for polypropylene/wood-flour composites[J].Polymer Testing,2007,26(5):619-628. |
[13] | Lisperguer J,Bustos X,Saravia Y.Thermal and mechanical properties of wood flour polystyrene blends from postconsumer plastic waste[J].Journal of Applied Polymer Science,2011,119(1):443-451. |
[14] | Karmarkar A,Chauhan S S,Modak J M,et al.Mechanical properties of wood-fiber reinforced polypropylene composites:Effect of a novel compatibilizer with isocyanate functional group[J].Composites Part A:Applied Science and Manufacturing,2007,38(2):227-233. |
[15] | Zhong Y,Poloso T,Hetzer M,et al.Enhancement of wood/ polyethylene composites via compatibilization and incorporation of organoclay particles[J].Polymer Engineering and Science,2007,47(6):797-803. |
[16] | Lei Y,Wu Q.Recycling engine oil containers to prepare wood-plastic composites[J].Journal of Applied Polymer Science,2011,122(2):964-972. |
[17] | Bengtsson M,Gatenholm P,Oksman K.The effect of crosslinking on the properties of polyethylene/wood flour composites[J].Composites Science and Technology,2005,65(10):1468-1479. |
[18] | Bengtsson M,Oksman K.The use of silane technology in crosslinking polyethylene/wood flour composites[J].Composites Part A:Applied Science and Manufacturing,2006,37(5):752-765. |
[19] | Bengtsson M,Stark N M,Oksman K.Profile extrusion and mechanical properties of crosslinked wood-thermoplastic composites[J].Polymer Composites,2006,27(2):184-194. |
[20] | Bengtsson M,Stark N M,Oksman K.Durability and mechanical properties of silane cross-linked wood thermoplastic composites[J].Composites Science and Technology,2007,67(13):2728-2738. |
[21] | Xiong C,Qi R,Gong W.The preparation and properties of wood flour/high density polyethylene composites by in-situ reaction extrusion[J].Polymers for Advanced Technologies,2009,20(3):273-279. |
[22] | Li Z,Gao H,Wan Q.Preparation of highly filled wood flour/recycled high density polyethylene composites by in situ reactive extrusion[J].Journal of Applied Polymer Science,2012,124(6):5247-5253. |
[23] | Hassan M L,Rowell R M,Fadl N A,et al.Thermoplasticization of bagasse.Ⅱ.dimensional stability and mechanical properties of esterified bagasse composite[J].Journal of Applied Polymer Science,2000,76(4):575-586. |
[24] | Matuana L M,Balatinecz J J,Sodhi R N S,et al.Surface characterization of esterified cellulosic fibers by XPS and FTIR spectroscopy[J].Wood Science and Technology,2001,35(3):191-201. |
[25] | Machadoa A V,Covasa J A,van Duin M.Effect of polyolefin structure on maleic anhydride grafting[J].Polymer,2001,42(8):3649-3655. |
[26] | Phillips P J,Kao Y H.Crystallinity in chemically crosslinked low density polyethylenes:2.Crystallization kinetics[J].Polymer,1986,27(11):1679-1686. |
[27] | Gohil R M,Phillips P J.Crystallinity in chemically crosslinked low density polyethylenes:3.Morphology of the XLPE-2 system[J].Polymer,1986,27(11):1687-1695. |
[28] | Bogoeva-Gaceva G,Mangovska B,M(a)der E.Crystallization kinetics of maleic anhydride-modified iPP studied by POM[J].Journal of Applied Polymer Science,2000,77 (14):3107-3118. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%