The microstructure and texture in a commercially processed AI-6 wt% Cu-0.4 wt% Zr (Suprall00) aluminium alloy have been investigated after annealing and hot tensile straining at 450℃, using a field emission gun scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The microstructure of commercially processed alloy had a relatively large fraction of high angle grain boundaries (HAGBs) which were aligned parallel to the rolling direction, and a strong texture. Annealing at 450℃ led to an increase in the fraction of HAGBs and to an increase in HAGB spacing and these changes were progressively enhanced by subsequent tensile deformation. The increasing fraction of HAGBs was due to the annihilation of low angle grain boundaries (LAGBs). A sharpening of texture during annealing was attributed to preferential textural growth, and the reduction of texture at higher tensile strains led to the development of superplastic behaviour. The present work supports the view that the evolution of the fine grain microstructure during the high temperature straining of SuprallO0 is primarily due to the accumulation of a large area of grain boundary during the initial thermomechanical processing, and does not involve any unusual restoration processes.
参考文献
[1] | N. Ridley;E. Cullen .Effect of thermomechanical processing on evolution of superplastic microstructures in Al-Cu-Zr alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2000(2):117-124. |
[2] | M. EDDAHBI;T.R. McNELLEY;O.A. RUANO .The Evolution of Grain Boundary Character during Superplastic Deformation of an Al-6 Pct Cu-0.4 Pct Zr Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(5):1093-1102. |
[3] | T.R. McNELLEY;D.L. SWISHER;M.T. PEREZ-PRADO .Deformation Bands and the Formation of Grain Boundaries in a Superplastic Aluminum Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(2):279-290. |
[4] | F. J. HUMPHREYS .Review Grain and subgrain characterisation by electron backscatter diffraction[J].Journal of Materials Science,2001(16):3833-3854. |
[5] | P.S. Bate;N. Ridley;B. Zhang .Mechanical behaviour and microstructural evolution in superplastic Al-Li-Mg-Cu-Zr AA8090[J].Acta materialia,2007(15):4995-5006. |
[6] | J.L.SONG;P.S.BATE .PLASTIC ANISOTROPY IN A SUPERPLASTIC DUPLEX STAINLESS STEEL[J].Acta materialia,1997(7):2747-2757. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%