复合材料在固化过程中产生的残余应力会严重影响材料的使用和安全。首先在研究和测试了布拉格光栅温度和应力灵敏度的基础上,将3根光栅分别以平行于碳纤维的方向置入预浸料的上、中、下3个位置,以此获得复合材料不同厚度位置的残余应力变化情况。监测结果表明,上、下层光栅监测到的预浸料固化过程几乎完全一致,而在降温时下层的布拉格光栅残余应力则比上层的要大得多,中间层布拉格光栅在固化过程中测得的残余应力最小,但在降温过程中的热残余应力不易释放而导致最后的残余应力也较大。
Residual stress formed in the curing process can greatly affect the application and safety of composite material. In this paper, the temperature sensitivity and stress sensitivity of fiber Bragg grating (FBG) were firstly investigated, and then three FBG sensors parallelling to carbon fiber were embedded into different depth direction of composite material in order to in-situ monitor the changes of residual stress. The results show that change trends of the upper FBG sensor almost stay the same with the lower one, while the lower FBG sensor displays much more residual stress than the upper one at cooling stage. The middle FBG sensor experiences the least residual stress at curing process, but it has the major residual stress at last because of residual thermal stress existing.
参考文献
| [1] | Wu Anping;Zou Jian;Huang Shanglian .Monitoring resin matrix composite-curing process by fiber optic self refer- ential method[J].Journal of Functional Materials,1994,25(01):74-76. |
| [2] | R. de Oliveira;S. Lavanchy;R. Chatton .Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing[J].Composites. Part A, Applied science and manufacturing,2008(7):1083-1090. |
| [3] | White S R;Hahn H T .Process modeling of composite materials:residual stress development during cure,Part I model formulation[J].Journal of Composite Materi- als,1992,26(16):24022422. |
| [4] | V. Antonucci;A. Cusano;M. Giordano .Cure-induced residual strain build-up in a thermoset resin[J].Composites, Part A. Applied science and manufacturing,2006(4):592-601. |
| [5] | Murukeshan VM.;Ong LS.;Seah LK.;Chan PY. .Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors[J].Sensors and Actuators, A. Physical,2000(2):153-161. |
| [6] | 福田武人.光纤传感器在监测RTM固化过程及复合材料健康状况中的应用[J].纤维复合材料,2002(03):56-61. |
| [7] | Parlevliet, PP;Bersee, HEN;Beukers, A .Measurement of (post-)curing strain development with fibre Bragg gratings[J].Polymer Testing,2010(3):291-301. |
| [8] | 周智,田石柱,赵雪峰,武湛君,欧进萍.光纤布拉格光栅应变与温度传感特性及其实验分析[J].功能材料,2002(05):551-554. |
| [9] | 万里冰,武湛君,张博明,王殿富.光纤布拉格光栅监测复合材料固化[J].复合材料学报,2004(03):1-5. |
| [10] | Philippe A. Olivier .A note upon the development of residual curing strains in carbon/epoxy laminates. Study by thermomechanical analysis[J].Composites, Part A. Applied science and manufacturing,2006(4):602-616. |
| [11] | Crossby P A;Powell G R;Fernado G F et al.A com- parative study of optical fiber cure monitoring methods[J].SHE,1997,3042:41-53. |
| [12] | Mulle M;Collombet F;Olivier P .Assessment ot cure residual strains through the thickness of carbon expoxy laminates using FBGs,Part I:Elementary specimen[J].Composites Part A:Applied Science and Manufac- turing,2009,40(01):94-104. |
| [13] | Hahn H .Residual stresses in polymer matrix compos ites[J].Journal of Composite Materials,1976,12:266-278. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%