用SEM和TEM等研究了Nb-V-Ti微合金钢的组织,特别是复合析出相的形貌和形成机制,并探讨了其对力学性能的影响.结果表明:试验用钢的组织为典型的铁素体-珠光体组织,TiN形成于连铸坯冷却过程的较高温度区间,形态经历了由球形向方形的长大过程;复合析出相包含Nb、V、Ti,NbC和VC依附于先析出的TiN表面以共格关系形核长大的,整体呈铆钉形或其它不规则形状,尺寸为50~70 nm.
参考文献
[1] | Kestenbach HJ .Dispersion hardening by niobium carbonitride precipitation in ferrite[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1997(9):731-739. |
[2] | S.S. Campos;E.V. Morales;H.-J. Kestenbach .Detection of interphase precipitation in microalloyed steels by microhardness measurements[J].Materials Characterization,2004(4/5):379-384. |
[3] | S.Q. Yuan;G.L. Liang .Dissolving behaviour of second phase particles in Nb-Ti microalloyed steel[J].Materials Letters,2009(27):2280-2282. |
[4] | Poths R M;Higginson R L;Palmiere E J .Complex precipitation behaviour in a micwalloyed plate steel[J].Scripta Materialia,2001,44(01):147-151. |
[5] | Pandit A;Murugaiyan A;Podder AS;Haldar A;Bhattacharjee D;Chandra S;Ray RK .Strain induced precipitation of complex carbonitrides in Nb-V and Ti-V microalloyed steels[J].Scripta materialia,2005(11):1309-1314. |
[6] | S. Shanmugam;M. Tanniru;R. D. K. Misra .Microalloyed V-Nb-Ti and V steels Part 2 - Precipitation behaviour during processing of structural beams[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(2):165-177. |
[7] | S.G. Hong;K.B. Kang;C.G. Park .Strain-induced precipitation of NbC in Nb and Nb-Ti microalloyed HSLA steels[J].Scripta materialia,2002(2):163-168. |
[8] | Baker T N.Titanium Technology in Microalloyed Steel[M].London:Institute of Materials,1997 |
[9] | He Kejian;Baker T N .The effects of small titanium additions on the mechanical properties and the microstructures of controlled rolled niobium-bearing HSLA plate steels[J].Materials Science and Engineering A,1993,169(1-2):53-65. |
[10] | Tirnanic S;Curcic R;Tirnanic D et al.Properties of thermomechanically roiled Nb/Ti microalloyed steel sheets[J].Steel Research International,1989,60(12):561-570. |
[11] | 李永良,陈梦谪.微钛钢中TiN析出对奥氏体晶粒长大的影响[J].北京师范大学学报(自然科学版),1999(01):38-41. |
[12] | 雍岐龙;马鸣图;吴宝榕.微合金钢-物理和力学冶金[M].北京:机械工业出版社,1989:437-438. |
[13] | Vander Merwe J H;Shiflet G J .The role of structural ledges at phase boundaries-Ⅲ.F.C.C.-B.C.C.interfaces in Kurdjumov-Sachs orientation[J].Acta Metallurgica Et Materialia,1994,42(04):1199-1205. |
[14] | Tomita Y;Saito N;Tsuzuki T et al.Improvement in HAZ toughness of steel by TiN-MnS addition[J].ISIJ International,1994,34(10):829-835. |
[15] | Kunze J .Solubility of titanium nirtride in delta-iron[J].Steel Research (Germany),1991,62(10):430-432. |
[16] | Taylor K A .Solubility products for titanium-,vanadium-,and niobium-carbide in ferrite[J].Scripta Metallurgica et Materialia,1995,32(01):7-12. |
[17] | 张莉芹,袁泽喜,陈晓,卜勇.大线能量低焊接裂纹敏感性钢的焊接(一)--热影响区强韧性机理研究[J].压力容器,2002(07):29-34. |
[18] | 陈颜堂,郭爱民,李平和.Nb-Ti微合金化超低碳低合金高强度钢中第二相的析出行为[J].金属热处理,2007(09):51-54. |
[19] | G.K. Tirumalasetty;M.A. van Huis;C.M. Fang .Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels[J].Acta materialia,2011(19):7406-7415. |
[20] | 曹建春,雍岐龙,刘清友,孙新军.含铌钼钢中微合金碳氮化物沉淀析出及其强化机制[J].材料热处理学报,2006(05):51-55. |
[21] | Strid J;Easteding K E .On the chemistry and stability of complex carbides and nitrides in microalloyed steels[J].Acta Metallurgica,1985,33(11):2057-2074. |
[22] | 王福明;韩其勇;李长荣 .钢中微合金碳氮化物复合相的形成机制[J].钢铁,1995,30(03):50-52. |
[23] | Craven A J;He K;J Garvie L A J et al.Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels-Ⅰ.(Ti,Nb)(C,N) particles[J].Acta Materialia,2000,48(15):3857-3868. |
[24] | Fairchild D P;Howden D G;Clark W A T .The mechanism of brittle fracture in a microalloyed steel:Part Ⅱ.mechanistic modeling[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31(03):653-667. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%