Two cold rolled hot-dip galvanizing dual phase (DP) 450 steels with different amounts of chromium were designed and the effects of the chromium concentration and galvanizing processes on the microstructure and mechanical properties were also investigated. The results show that the experimental steels exhibit typical dual phase microstructure character. However, the ferrite phase of steel with higher chromium is more regular and its boundaries are clearer. Meanwhile, martensite austenite (MA) island in steel No. 2 is diffused and no longer distributes along the grain boundary as net or chain shape. More MA islands enriched with Cr element can be found in the ferrite grains, and the increment of Cr element improves the stablity of the austenite so that the austenite has been reserved in MA islands. In addition, the experimental steel with higher chromium exhibits better elongation, lower yield ratio and better formability. The mean hole expanding ratio of steels No. 1 and No. 2 is 161.70% and 192.70%, respectively.
参考文献
| [1] | Y.L.Kang.Theory and Technology of Process and Formation for Advanced Automobile Steel Sheets[M].北京:冶金工业出版社,2009 |
| [2] | K.S.Parka;K.Parkb;D.L.Lee;C.S.Lee .[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2007,499-451:1135-1138. |
| [3] | M.H.Akbarpour;A.Ekrami .[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,475:293-298. |
| [4] | X.Liang;J.Li;Y.H.Peng .[J].Materials Letters,2008,62:327-329. |
| [5] | S.Kuang;Y.L.Kang;H.Yu;R.Liu .[J].Int J Miner Metall Mater,2009,16:159-164. |
| [6] | J.J.Luo;W.Shi;Q.F.Huang;L.Li .[J].J Iron Steel Res Int,2010,17(1):54-58. |
| [7] | Q.H.Han;Y.L.Kang;X.M.Zhao;C.Lü,L.F.Gao .[J].J Iron Steel Res Int,2011,18(5):52-58. |
| [8] | H.Fatih;U.Hüseyin .[J].J Iron Steel Res Int,2011,18(8):65-72. |
| [9] | F.Ozturk;S.Toros;S.Kilic .[J].J Iron Steel Res Int,2009,16(6):41-46. |
| [10] | A.Hüseyin;K.Z.Hawa;K.Ceylan .[J].J Iron Steel Res Int,2010,17(4):73-78. |
| [11] | K.Hasegawa;K.Kawamura;T.Urabe;Y.Hosoya .[J].ISIJ International,2004,44(3):603-609. |
| [12] | H.Q.Han.Study of Microstructure and Property of Cold Rolled and Continuous Annealed DP Steel with Low C-Si-Mn System[M].North-eastern University,Shenyang,2009 |
| [13] | F.Niu;A.M.Zhao;Z.Z.Zhao;G.C.Jin,C.Tian .[J].J Iron Steel Res,2010,22(7):47-50. |
| [14] | G.Süleyman .[J].Materials Letters,2009,63:2381-2383. |
| [15] | J.Lis;A.K.Lis;C.Kolan .[J].Journal of Materials Processing Technology,2005,162-163:350-354. |
| [16] | M.Erdogan;S.Tekeli .[J].Mater Des,2002,23:597-604. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%