并罐式无钟炉顶的布料操作会产生蛇形偏析,形成不均匀的料面形状,导致料面透气性调节失控的问题.通过开炉布料料面形状的测试结果可知,并罐式无钟炉顶料面中心与高炉中心不重合,料面中心发生偏移.为了研究无钟布料过程中的料面分布情况,通过建立数学模型,计算炉料颗粒在高炉料面周向上的落点分布,根据落点分布得到料面对称中心位置,并将计算结果与开炉料面形状测试结果对比.根据分析计算结果,从理论出发,提出减小布料过程料流偏析的措施和建议.
参考文献
| [1] | 刘云彩.高炉布料规律[M].北京:冶金工业出版社,2012.,2012. |
| [2] | Hattori M,Iino B,Shimomura A,et al .Development of Burden Distribution Simulation Model for Bell-Less Top in Large Blast Furnace and Its Application[J].ISIJ International,1993,33(10):1070.,1993. |
| [3] | Yoshiyuki Matsui,Akito Kasai,Kenji Ito,et al .Stabilizing Burden Trajectory Into Blast Furnace Top Under High Ore to Coke Ratio Operation[J].ISIJ International,2003,43(8):1159.,2003. |
| [4] | Masaru Ida,Kiyoshi Ogata,Takeshi Sato,et al.Development of Burden Distribution Controlat New Mizushima No.4 Blast Furnace[C]//ISSTech2003 Conference Proceedings.Warrandale,2003:141.,2003. |
| [5] | REN Ting-zhi,JIN Xin,BEN Hong-yan,YU Cheng-zhong.Burden Distribution for Bell-Less Top With Two Parallel Hoppers[J].钢铁研究学报（英文版）,2006(02):14-17. |
| [6] | Xu Jian,Wu Shengli,Kou Mingyin,et al .Circumferential Burden Distribution Behaviors at Bell-Less Top Blast Furnace With Parallel Type Hoppers[J].Applied Mathematical Modelling,2011,35 |
| [7] | 杜鹏宇,程树森,滕召杰.并罐式无钟炉顶布料蛇形偏料的研究[J].北京科技大学学报,2011(04):479-485. |
| [8] | 朱清天,程树森.高炉料流轨迹的数学模型[J].北京科技大学学报,2007(09):932-936. |
| [9] | 高征铠,宋文刚,高泰.激光测试技术在宝钢1号高炉上的应用[C]∥第七届中国钢铁年会论文集.北京,2009:381.,2009. |
| [10] | Lee Ⅱ-Ock,Chung Hae-Yong,Bang KeaMoon,et al.Burden Distribution Control for No.2 BF of Pohang Works[C]//Ironrnaking Conference Proceedings.Washington,1986:393.,1986. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%