不同程度量化水淬可在35CrMo钢中得到粗板条状马氏体、细板条状马氏体、针状马氏体、隐针马氏体组织或与残余奥氏体复合的不同组织，也可以通过量化水淬来调整钢的硬化层、表面硬度、性能指标、淬火变形量，从而既能满足性能要求又能严格控制热处理变形，并且对降低生产成本效果显著。
Different degree quantitative water quenching in 35CrMo slats martensite, needle shaped Martensite, and retained Austenite. steel may have coarse lath of Martensite, fine And steel hardening layer, surface hardness, performance indicators and quenching deformation volume can also be adjusted by quantitative water quenching so that it can also meet performance requirements and strictly control heat treatment deformation~ and have significant effect on reducing production cost.
参考文献
| [1] | 张文勇,张鬲君,陈亚维,陈俊奇,张秀全,符小玲.42CrMo钢量化水淬应用研究[J].金属热处理,2007(11):101-103. |
| [2] | 吴承建.金属材料学[M].北京:冶金工业出版社,2000:38. |
| [3] | 张文勇,陈亚维.量化水淬原理与控制参数[J].中原工学院学报,2004(01):34-37,42. |
| [4] | 蔡美良;丁惠麟;孟沪龙.新编工模具钢金相热处理[M].北京:机械工业出版社,2000:303. |
| [5] | Diaz-Fuentes M;Gutifirrez I.Analysis of Different Acicular Ferrite Microstruetures Generated in a Medium-Carbon Mo- lybdenum Steel[J].Materials Science and Engineering,2003:315. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%