纳米晶金属块体材料制备技术与力学性能研究进展

材料导报, 2007, 21(4): 111-116.

纳米晶金属块体材料制备技术与力学性能研究进展

李安敏 ^1, , 张喜燕 ^2, , 赵新春 ^3, , 张津 ^4, , 李聪 ^5, , 邱绍宇 ^6, , 张鹏程 ^7,

1.广西大学物理科学与工程技术学院,南宁,530004

2.广西大学物理科学与工程技术学院,南宁,530004;重庆工学院材料科学与工程学院,重庆,400044

3.广西大学物理科学与工程技术学院,南宁,530004

4.重庆工学院材料科学与工程学院,重庆,400044

5.中国核动力设计研究院核燃料及材料国家级重点实验室,成都,610041

6.中国核动力设计研究院核燃料及材料国家级重点实验室,成都,610041

7.重庆工学院材料科学与工程学院,重庆,400044

基金项目: 广西自然科学基金(0575-18) 核材料与燃料国家级重点实验室基金(514810501) 国家自然科学基金(50461001;50471086) 广西技术攻关项目(0639003)

关键词：纳米块体材料 , 制备 , 力学性能 , 变形机制 , 断裂机制

Progress in Preparation Technology and Mechanical Properties of Nanocrystalline Bulk Metals

主要总结了纳米晶金属块体材料的制备技术与力学性能的研究进展.讨论了各种制备技术的特点与现存的问题,以及纳米晶金属块体材料的强度、塑性、应变速率敏感性、超塑性、变形机制与断裂机制等力学性能问题.

参考文献

[1]	张立德;解思深.纳米材料和纳米结构[M].北京:化学工业出版社,2005:316.
[2]	Hughes G D;Smith S D;Pande C S et al.[J].Scripta Metallurgica et Materialia,1986,20:93.
[3]	Tang J S C;Koch C C .[J].Scripta Metallurgica et Materialia,1990,24:1599.
[4]	Chang H;H(o)flev H J;Alstetter C J et al.[J].Scripta Metall,1991,25:1161.
[5]	Lu K;Wang Y Z;Wei W D et al.[J].Adv Cryogen Mater,1991,138:28.
[6]	Wang Y Z;Qiao G W;Liu X D et al.[J].Materials Letters,1993,17:152.
[7]	Karch J;Birringer R;Gleiter H .[J].NATURE,1987,330:2102.
[8]	Chokshi A H;Rosen A;Karch J et al.[J].Scripta Metallurgica et Materialia,1989,23:1679.
[9]	Wang J T;Hu Z Q;Ding B Z .[J].Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,1993,169:L17.
[10]	Chang H;Altstetter C J;Averback R S .[J].Journal of Materials Research,1992,7:2962.
[11]	Schuh C A;Nieh T G;Yamasaki T .[J].Scripta Materialia,2002,46:735.
[12]	Birringer R;Gleiter H;Klein H P et al.[J].Physics Letters A,1984,102:365.
[13]	Gleiter H;Marquardt P .[J].ZEITSCHRIFT FUR METALLKUNDE,1984,75(04):263.
[14]	卢磊 .电解沉积纳米晶Cu的热稳定性及机械性能研究[D].中国科学院金属研究所,2000.
[15]	Haas V;Gleiter H;Birringer R .[J].Scripta Metallurgica et Materialia,1993,28:721.
[16]	Sanders P G;Fougere G E;Thomopson L J et al.[J].Nano-Structured Materials,1997,8:243.
[17]	Hahn H .[J].Nano-Structured Materials,1997,9:3.
[18]	Benjamin J S .[J].Metallurgical Transactions,1970,1:2943.
[19]	Benjamin J S .[J].Scientific American,1976,234:40.
[20]	Koch C C .[J].Nano-Structured Materials,1997,9:13.
[21]	谷万里,吕卫卫.Ti2SiC2/Cu纳米复合材料的制备与微观组织[J].热加工工艺,2006(14):25-27.
[22]	Moulzolf S C;Lad R J;Blau P J .[J].Thin Solid Films,1999,347:220.
[23]	Balachander N;Sukenik C N .[J].Langmuir,1990,6:1621.
[24]	Wu JH.;Mate CM. .Contact angle measurements of lubricated silicon wafers and hydrogenated carbon overcoats[J].Langmuir: The ACS Journal of Surfaces and Colloids,1998(17):4929-4934.
[25]	Brenier R;Mugnier J;Mirica E .[J].Applied Surface Science,1999,14:385.
[26]	Inoue A;Kimura H .[J].Journal of Light Metals,2001,1:31.
[27]	Inoue A;Fan C;Takenchi A .[J].Journal of Non-Crystalline Solids,1999,250-252:724.
[28]	Inoue A;Zhang W;Zhang T et al.[J].Acta Materialia,2001,49:2645.
[29]	Akhmadeev N A;Kopylov V I;Mulyukov R R et al.[J].Izvest Akad Nauk SSSR Metally,1992,5:96.
[30]	Smimova N A;Levit V I;Pilyugin V I;Kuznetsov R I et al.[J].Fiz Met Metall,1986,61:1170.
[31]	Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189.
[32]	Masakazu Kamachi;Minoru Furukawa;Zenji Horita et al.[J].Materials Science and Engineering,2003,A347:223.
[33]	Minoru Furukawa;Zenji Horita;Terence G Langdon .[J].Materials Science and Engineering,2002,A332:97.
[34]	Sungwon Lee;Patrick B Berbon;Minoru Furukawa et al.[J].Materials Science and Engineering,1999,A272:63.
[35]	Nagarajan R;Chattopadhyay K .[J].Acta Metallurgica Et Materialia,1994,42:947.
[36]	Czirákiá;Fogarassy B;Van Tendeloo G et al.[J].Journal of Alloys and Compounds,1994,210:135.
[37]	赵永好 .非晶晶化、机械研磨和磁控溅射制备纳米晶体材料的结构特征[D].中国科学院金属研究所,2001.
[38]	张久兴,刘科高,周美玲.放电等离子烧结技术的发展和应用[J].粉末冶金技术,2002(03):129-134.
[39]	高濂;宫本大树 .[J].无机材料学报,1999,4(02):128.
[40]	李汝霞;鲁燕萍.[J].真空电子技术,1998(01):17.
[41]	李元元,张建兵,李小强,龙雁,陈维平.SPS烧结制备WC-6Co-1.5Al硬质合金的研究[J].粉末冶金技术,2006(03):199-202,208.
[42]	王公平,岳明,张久兴,刘卫强,任仁,刘程扬.放电等离子体烧结NdFeB永磁材料力学性能的研究[J].粉末冶金技术,2006(04):259-262,266.
[43]	王志伟.TiAl纳米合金的机械活化-放电等离子原位烧结[J].中国机械工程,2006(13):1425-1428.
[44]	陈君平 .[J].机械工程材料,2005,29(10):50.
[45]	nselmi-Tamburini U;Garay J E;Munir Z A .[J].Scripta Materialia,2006,54(05):823.
[46]	Zhang H W;Gopalan R;Mukai T et al.[J].Scripta Materialia,2005,53(07):863.
[47]	Polli AD.;Fischer A.;Weinberg G.;Jentoft FC.;Schlogl R. Ruhle M.;Wagner T. .Structural characterization of ZrO2 thin films produced via self-assembled monolayer-mediated deposition from aqueous dispersions[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(1/2):122-127.
[48]	薛群基,喇培清.燃烧合成熔化制备块体纳米结构材料和金属间化合物基复合材料及其摩擦学性能[J].中国有色金属学报,2004(z1):128-137.
[49]	中国科学院兰州化学物理研究所固体润滑国家重点实验室.燃烧合成熔化制备块体纳米晶材料[J].中国基础科学,2006(03):40.
[50]	张耳土;肖涤凡.[J].现代陶瓷技术,1994(03):19.
[51]	Goshchitskii B N;Kirk M A;Sagaradze V V et al.[J].Nano-Structured Materials,1997,9:189.
[52]	McClandlish L E .[J].Mater Techn,1993,8:193.
[53]	Zhang Xiyan;Jia Chong;Liu Zhinong.A study on the microstructure and grinding resistance of nanocrystalline Ti4Al-2V Alloy[A].中国西安,2005:16-10.
[54]	Ebrahimi F;Zhai Q;Kong D .[J].Scripta Materialia,1998,39:315.
[55]	Dalla Torre F;Van Swygenhoven H;Victoria M .[J].Acta Materialia,2002,50:3957.
[56]	Ebrahimi F;Bourne G R;Kelly M S et al.[J].Nanost Mater,1999,11:343.
[57]	Sanders P G;Eastman J A;Weertman J R .[J].Acta Materialia,1997,45:4019.
[58]	Lu L;Li SX;Lu K .[J].Scripta Materialia,2001,45:1163.
[59]	Weertman J R.Mechanical behaviour of nanocrystalline metals in nanostructured materials:Processing,properties,and potential applications[M].Norwich:William Andrew Publishing,2002
[60]	Legros M.;Rittner MN.;Weertman JR.;Hemker KJ.;Elliott BR. .Microsample tensile testing of nanocrystalline metals[J].Philosophical Magazine.A.Physics of condensed matter, defects and mechanical properties,2000(4):1017-1026.
[61]	Wang Y M;Wang K;Pan D et al.[J].Scripta Materialia,2003,48:1581.
[62]	Schuh C;Nieh T G;Iwasaki H .[J].Acta Materialia,2003,51:431.
[63]	Jeong D H;Erb U;Aust K T et al.[J].Scripta Materialia,2003,48:1067.
[64]	Chokshi A H;Rosen A;Karch J et al.[J].Scripta Metallurgica,1989,23:1679.
[65]	Masumura R A;Hazzledine P M;Pande C S .[J].Acta Materialia,1998,46:4527.
[66]	Wang N;Wang Z;Aust K T et al.[J].Materials Science and Engineering,1997,A237:150.
[67]	卢柯.纳米孪晶纯铜的强度和导电性研究[J].中国科学院院刊,2004(05):352-354.
[68]	Dao M;Lu L;Shen Y F et al.[J].Acta Materialia,2006,54(20):5421.
[69]	Lu L;Sui M L;Lu K .[J].Science,2000,287:1463.
[70]	卢柯,卢磊.金属纳米材料力学性能的研究进展[J].金属学报,2000(08):785-789.
[71]	Coble R L .[J].Journal of Applied Physics,1963,34:1679.
[72]	Karch j Birringer R;Gleiter H .[J].NATURE,1987,330:556.
[73]	Dalla Torre F;Van Swygenhoven H;Sch(a)ublin R et al.[J].Scripta Materialia,2005,53:23.
[74]	McFadden S X;Mishra R S;Valley R Z et al.[J].Nature,1999,398:684.
[75]	卢柯.纳米晶体Cu的室温超塑延展性[J].中国科学院院刊,2001(01):29-31.
[76]	Wunderlich W;Ishida Y;Maurer R .[J].Scripta Metallurgica et Materialia,1990,24:403.
[77]	Nastasi M;Parkin D M;Gleiter H.Mechanical properties and deformation behavior of materials having ultra-fine microstructures[M].Kluwer,1993
[78]	Siegel R W .[J].Materials Science Forum,1997,851:235.
[79]	Huang J Y;Wu Y K;Ye H Q .[J].Acta Materialia,1996,44:1211.
[80]	Islamgaliev R K;Chmelik F;Kuzel R .[J].Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,1997,A234-236:335.
[81]	Cottrell A H.Dislocations and plastic flow in crystals[M].Oxford:Clarendon Press,1961
[82]	Morris D G;Morris M A .[J].Acta Metallurgica Et Materialia,1991,39:1763.
[83]	Schiotz J;Di Tolla F D;Jacobsen K W .[J].Nature,1998,391:561.
[84]	Schiotz J.;Di Tolla FD.;Jacobsen KW.;Vegge T. .Atomic-scale simulations of the mechanical deformation of nanocrystalline metals[J].Physical Review.B.Condensed Matter,1999(17):11971-11983.
[85]	Swygenhoven H V;Spaczer M;Caro A .[J].Acta Materialia,1999,47:3117.
[86]	Yamakov V;Wolf D;Salazar M et al.[J].Acta Materialia,2001,49:2713.
[87]	Yamakov V;Wolf D;Phillpot S R et al.[J].Nature Materials,2002,1:45.
[88]	Yamakov V;Wolf D;Phillpot S R et al.[J].Acta Materialia,2002,50:5005.
[89]	Keblinski P;Wolf D;Gleiter H .[J].Interface Science,1998,6:205.
[90]	Yamakov V;Wolf D;Phillpot S R;Gleiter H .[J].Acta Materialia,2002,50:61.
[91]	Gutkin M Y;Ovidkol I A;Skiba N V .[J].Acta Materialia,2003,51:4059.
[92]	Fedorov A A;Gutkin M Y;Ovidko I A .[J].Acta Materialia,2003,51:887.
[93]	Wang Y;Chen M;Zhou F;Ma E .High tensile ductility in a nanostructured metal.[J].Nature,2002(6910):912-915.
[94]	Yamakov V;Wolf D;Phillpot S R;Gleiter H .[J].Acta Materialia,2003,51:4135.
[95]	Zhang X Y;Jia C.[J].Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2006(1-2):77.
[96]	Zhang X Y;Hu Z L;Zhou S J .[J].Philosoph Magaz Lett,2005,85(11):595.
[97]	Jia D;Ramesh K T;Ma E .[J].Acta Materialia,2003,51:3495.
[98]	Carsley J E;Fisher A;Milligan W W et al.[J].Metallurgical and Materials Transactions,1998,9A:2261.
[99]	Kumar K S;Suresh S;Chisholm M F et al.[J].Acta Materialia,2003,51:387.
[100]	Kelchner C L;Plimpton S J;Hamilton J C .[J].Physical Review B:Condensed Matter,1998,58:85.
[101]	Hugo R C;Kung H;Weertrnan J R et al.[J].Acta Materialia,2003,51:1937.
[102]	Mukai T;Suresh S;Kita K et al.[J].Acta Materialia,2003,51:4197.
[103]	Hasnaoui A;Van Swygenhoven H;Derlet P M .[J].Science,2003,300:1550.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

纳米晶金属块体材料制备技术与力学性能研究进展

Progress in Preparation Technology and Mechanical Properties of Nanocrystalline Bulk Metals

参考文献