欢迎登录材料期刊网

材料期刊网

高级检索

利用非平衡磁控溅射技术在镜面抛光的SCM415渗碳淬火钢基片上沉积了无掺杂类金刚石(DIE)薄膜和不同含量Ti掺杂类金刚石(Ti-DIE)薄膜.利用AFM、SEM、TEM对薄膜的微观结构与形貌进行了观察,利用纳米硬度计、摩擦磨损试验仪及纳米划痕仪测试了薄膜的显微硬度、摩擦系数及薄基结合强度.结果表明:随着Ti的掺杂,薄膜硬度先迅速降低,然后保持不变,在Ti含量为25at%时薄膜硬度出现回升,膜基结合强度随Ti的掺杂呈单调增强趋势.与无掺杂类金刚石薄膜相比,掺杂Ti后薄膜表面微观凸凹增多,摩擦系数增大.对于Ti-DIE薄膜来说,随着Ti掺杂量的增加,摩擦系数出现减小的趋势.其原因在于Ti掺杂量的增加使Ti-DLC薄膜变得更加致密,同时Ti的掺杂还有利于弥补基体表面的凸凹缺陷,使薄膜变得更平滑.

参考文献

[1] Yang S.;Renevier NM.;Teer DG.;Li X. .Tribological properties and wear mechanism of sputtered C/Cr coating[J].Surface & Coatings Technology,2001(0):85-93.
[2] Roger;Jagdish;Narayan .Laser processing of diamond-like oarhnn-metal compusites[J].Applied Surface Science,2005,245(1-4):420-430.
[3] Weng KW;Chen YC;Lin TN;Wang DY .Metal-doped diamond-like carbon films synthesized by filter-arc deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(3):1053-1057.
[4] V. Kulikovsky;P. Bohac;F. Franc;A. Deineka;V. Vorlicek;L. Jastrabik .Hardness, intrinsic stress, and structure of the a-C and a-C:H films prepared by magnetron sputtering[J].Diamond and Related Materials,2001(3 Pt.2):1076-1081.
[5] 付永辉,朱晓东,何家文,YANG Shi-cai.非平衡磁控溅射沉积类石墨膜及其摩擦磨损性能研究[J].摩擦学学报,2003(06):463-467.
[6] Sieged M P;Barbour JC;Provencio P N et al.Amorphons-tetrahedral diamondlike carbon layered structures resuhing from film growthenergetics[J].Applied Physics Letters,1998,73(06):759-761.
[7] M. P. Siegal;D. R. Tallant;P. N. Provencio .Ultrahard carbon nanocomposite films[J].Applied physics letters,2000(21):3052-3054.
[8] 聂朝胤,张碧云,谢红梅.非平衡磁控溅射掺Ti类金刚石薄膜的结构分析[J].金属学报,2007(11):1207-1210.
[9] YANG B;HUANG Z H;LIU C S et al.Tribological performanee and liquid impact erosion resistance of Ti-containing amorphous carbon coatings[J].Surface and Coatings Technology,2007,201(9-11):5157-5160.
[10] Veprek S;Hanssmann M;Reiprich S et al.Novel thermodynamically stable and oxidation resistant superhard coating materials[J].Surface and Coatings Technology,1996,86-87:394-401.
[11] Silva CWE;Branco JRT;Cavaleiro A .Characterization of magnetron co-sputtered W-doped C-based films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(3):1063-1068.
[12] Sunil K P;JIANG J C;Efstathios I .Effects of N-doping on the microstmcture,mechanical and tribolngical behavior of Cr-DLC films[J].Meletis Surf Coat Technol,2007,201:7917-7923.
[13] Baba K;Hatada R;Tanaka Y .Preparation and properties of W-containing diamond-like carbon films by magnetron plasma source ion implantation[J].Surface & Coatings Technology,2007(19/20):8362-8365.
[14] Dekempeneer E.;Vercammen K.;Meneve J.;Neerinck D. Eufinger S.;Pappaert W.;Sercu M.;Smeets J.;Van Acker K. .Abrasion resistant low friction diamond-like multilayers[J].Surface & Coatings Technology,2001(0):669-673.
[15] HU Y W;LI L H;CAI X et al.Mechanical and tribological properties of TiC/amorphous hydrogenated carbon compesite coatings fabrioated by DC magnetron sputtering with and without sample bias[J].Diamond and Related Materials,2007,1(01):181-186.
[16] Wang P;Wang X;Xu T;Liu WM;Zhang JY .Comparing internal stress in diamond-like carbon films with different structure[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2007(17):6899-6903.
[17] 柳翠,苟伟,牟宗信,李国卿.钛离子注入类金刚石碳膜的结构与性能的研究[J].功能材料,2005(02):301-303.
[18] Peters AM.;Nastasi M. .Titanium-doped hydrogenated DLC coatings deposited by a novel OMCVD-PIIP technique[J].Surface & Coatings Technology,2003(1):11-15.
[19] 江晓红,Rogachev A.V,陆小华,金元生.Ti合金化DLC膜的结构和力学性能[J].无机材料学报,2002(04):771-776.
[20] Y. Liu;M. Gubisch;T. Haensel;L. Spiess;J. A. Schaefer .Evaluation of the friction of WC/DLC solid lubricating films in vacuum[J].Tribology International,2006(12):1584-1590.
[21] Strondl C.;Carvalho NM.;De Hosson JTM.;van der Kolk GJ. .Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings[J].Surface & Coatings Technology,2003(2/3):288-293.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%