对激光造型技术的优点、应用价值、加工机理等作了简单阐述，另外就该技术的发展历史和国外的研究状况作了具体介绍，之后对国内的研究情况作了归纳性介绍。根据目前激光造型技术的相关研究，提出激光造型技术今后的研究方向，并展望了未来的应用前景。
Advantages, application and machining principle of laser surface texturing technology are expounded briefly. State of the art ol the technology at home and abroad is outlined. Comments on development of laser surface texturing technology and prospects of its application are presented.
参考文献
| [1] | Etsion F .State of the art in laser surface texturing[J].Journal of Tribology,2005(1):248-253. |
| [2] | Salama M E .The effect of micro roughness on the performance of parallel thrust bearing[J].Proceedings of the Institution of Mechanical Engineers,1950,163:149-161. |
| [3] | Hamilton D B;Walawit J A;Allen C M .A theory of lubrication by micro-irregularities[J].ASME Journal of Basie Engineering,1966,88(01):177-185. |
| [4] | Ranjan R;Lambeth D N;Tromel M et al.Laser texturing for low-flying-height media[J].Journal of Applied Physics,1991,69(08):5745-5747. |
| [5] | Geiger M.;Becker W.;Roth S. .Influence of laser-produced microstructures on the tribological behaviour of ceramics[J].Surface & Coatings Technology,1998(1/3):17-22. |
| [6] | Klink U;Flores .Honing cylinder boresin aluminum silicon materials[J].Werkstatt und Betrieb,1999,132(09):50-55. |
| [7] | Etsion I;Burstein L .A model for mechanical seals with regular microsurface structure[J].Tribology Transactions,1996,39(03):677-683. |
| [8] | Etsion I;Halperin G;Greenberg Y.Increasing mechanical seal life with laser-textured seal faces[A].Maastricht:BHR Group Limited,1997:3-11. |
| [9] | I. Etsion;Y. Kligerman;G. Halperin .Analytical and experimental investigation of laser-textured mechanical seal faces[J].Tribology Transactions,1999(3):511-516. |
| [10] | Etsion I;Halperin G .A laser surface textured hydrostatic mechanical seal[J].Tribology Transactions,2002,45(06):430-434. |
| [11] | I. Etsion;G. Halperin;E. Becker .The effect of various surface treatments on piston pin scuffing resistance[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2006(7/8):785-791. |
| [12] | Hoppermann A;Kordt M .Tribological optimisation using laser structured contact surface[J].lhydraulik und Pneumatik(O+P),2002,46(04):1-23. |
| [13] | Geiger M;Popp U;Engel U .Eximer laser micro texturing of cold forging tool surface-influence on tool life[J].Anniversary of the CIRP,2002,51:231-234. |
| [14] | Henry H;Yvonneq G D.Microtexturing of functional surfaces for improving their tribological performance[A].Saitama:Japan Science and Technology Agency,2000:217-221. |
| [15] | T.V.Kononenko;S.V.Garnov;S.M.Pimenov;V.I.Konov;V.Romano;B.Borsos;H.P.Weber .Laser ablation and micropatterning of thin TiN coatings[J].Applied physics, A. Materials science & processing,2000(6):627-631. |
| [16] | Dumitru G.;Romano V. .Laser microstructuring of steel surfaces for tribologial applications[J].Applied physics, A. Materials science & processing,2000(4):485-487. |
| [17] | Xiaolei Wang;Koji Kato;Koshi Adachi;Kohji Aizawa .The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed[J].Tribology International,2001(10):703-711. |
| [18] | Fenke G;Erdemir A;Ajayi L.Laser surface texturing of seal faces[A].,2003:77-84. |
| [19] | Erdemir A;Kovalchenko A;Erck R.Laser texturing of materials[A].,2004:71-76. |
| [20] | Herbst L;Lindner H;Heglin M.Targeting diesel engine efficiency[J].Industrial Laser Solutions,2004:32-35,10. |
| [21] | 孟小霞 .规则表面微造型的激光加工与摩擦学特性研究[D].镇江:江苏大学,2007. |
| [22] | S. Schreck;K.-H. Zum Gahr .Laser-assisted structuring of ceramic and steel surfaces for improving tribological properties[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2005(1/4):616-622. |
| [23] | Popp U;Engel U .Micro texturing of cold-forging tools-influence on tool life manufacturing technology[D].University of Eriangen-Nuremberg.Erlangen,Germany,2006. |
| [24] | P. Andersson;J. Koskinen;S. Varjus;Y. Gerbig;H. Haefke;S. Georgiou;B. Zhmud;W. Buss .Microlubrication effect by laser-textured steel surfaces[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(3/4):369-379. |
| [25] | Lin Z G .The experimental study of laser microprecision treatment of IC engine tappet[J].Tribology Transactions,1994,37(02):430-432. |
| [26] | 林子光.激光毛化与摩擦学设计[J].机械设计,2000(04):24-27. |
| [27] | 林子光;谢辉.改善机械零件表面形貌的试验研究[J].机械设计,1995(05):26-28. |
| [28] | 林子光;郭炎.表面形貌对抗擦伤能力影响的实验研究[J].机械设计,1999(11):8-11. |
| [29] | 于新奇,何松,蔡仁良,俞龙海,虞洪琨.激光加工多孔端面机械密封的摩擦特性试验研究[J].流体机械,2003(01):7-9. |
| [30] | 于新奇,蔡仁良.激光加工多孔端面机械密封的动压分析[J].华东理工大学学报(自然科学版),2004(04):481-484. |
| [31] | 任露泉;王再宙;韩志武 .激光处理非光滑凹坑表面耐磨实验的均匀设计研究[J].材料科学与工程,2002,20(02):93-95. |
| [32] | 邓宝清;任露泉;苏岩 等.模拟活塞缸套摩擦副的仿生非光滑表面的摩擦学的研究[J].吉林大学学报(工学版),2004,34(01):78-82. |
| [33] | 杨卓娟,韩志武,任露泉.激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究[J].摩擦学学报,2005(04):374-378. |
| [34] | 蔡兰,符永宏,叶云霞,张永康,田海燕.激光珩磨技术在气缸表面处理中的应用[J].江苏大学学报(自然科学版),2002(01):5-8,25. |
| [35] | 符永宏,陈志焕,陶根宁,戴金跃,王霄.发动机气缸表面规则微观形貌的激光加工研究[J].应用激光,2006(04):233-236. |
| [36] | 符永宏,纪敬虎,杨超君,华希俊,蔡兰.新型零泄漏非接触式机械密封及其激光表面微造型跨尺度加工工艺研究[J].润滑与密封,2008(01):27-32,38. |
| [37] | 孟永钢,王东华.通过激光纹理加工改善湿式摩擦离合器的摩擦特性[J].中国机械工程,2008(08):883-885,913. |
| [38] | YAO Yan-sheng;YUAN Gen-fu;MA Yu-ping.Research on tribological performance of QT600with laser surface texturing[A].Piscataway:IEEE Computer Society,2010 |
| [39] | 姚燕生,袁根福,钱德才,梁华琪.激光微造型表面摩擦学性能的试验研究[J].应用激光,2008(06):459-463. |
| [40] | 吕文斐,方亮.润滑条件下激光加工纹理的摩擦磨损[J].摩擦学学报,2009(01):1-4. |
| [41] | 李树林,殷建祥.发动机气缸套内表面激光造型加工技术[J].河南科技大学学报（自然科学版）,2009(02):26-28,31. |
| [42] | 秦浩,彭旭东,白少,盛颂恩,李纪云.激光加工多孔气体端面密封的静压性能研究[J].摩擦学学报,2009(03):205-209. |
| [43] | 万大平,胡德金,刘红斌,蔡兰蓉.脉冲激光毛化加工的计算机流体动力学数值模拟[J].中国激光,2007(07):1004-1008. |
| [44] | LIU Hong-bin,万大平,HU De-jin.激光毛化表面温度与应力的数值模拟与实验研究[J].材料热处理学报,2008(04):181-184. |
| [45] | 刘红斌,万大平,胡德金.脉冲激光表面熔凝熔池演变数值模拟[J].上海交通大学学报,2008(09):1438-1442. |
| [46] | 胡德金;万大平;王裕明 等.分光式激光毛化调制装置[P].中国,CN200710041118.9,2007. |
| [47] | 胡德金;刘红斌;万大平 .轧辊表面激光毛化与微合金化复合加工方法[P].中国,CN200710045619.4,2007. |
| [48] | 陈光南 .毛化轧辊的新方法及其应用[J].应用激光,1996,16(04):155-158. |
| [49] | 骆志高,郭啸栋,范彬彬.拉深模激光毛化工艺参数实验研究[J].模具工业,2009(03):60-62. |
| [50] | 李爱魁;汪爱英;孙丽丽.类金刚石(DLC)薄膜的激光素面毛化工艺研究[A].中国机械工程学会表面工程分会,2008 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%