本文利用可视化手段实验研究矩形截面微通道(1 mm×0.5 mm)内发生流动沸腾时气泡的生长及受限现象.实验使用去离子水为工质,气泡受限过程由高速CCD相机观察并记录.研究发现,气泡高度方向通道壁面的存在对气泡在该方向的生长产生强烈的限制作用,气泡生长后期顶端气液界面在并未与限制壁面接触时其曲率便明显减小,壁面对气泡生长的限制作用通过其对气泡界面施加一个壁面限制力而体现.通过对比不同运行工况条件下的气泡受限现象,分析讨论了气泡受限过程中其界面形状变化规律及影响因素.
参考文献
| [1] | Weilin Qu;Issam Mudawar .Thermal Design Methodology for High-Heat-Flux Single-Phase and Two-Phase Micro-Channel Heat Sinks[J].IEEE transactions on components and packaging technologies: A publication of the IEEE Components, Packaging, and Manufacturing Technology Society,2003(3):598-609. |
| [2] | Zhang C;Xing D;Li Y .Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trends[J].Biotechnology Advances: An International Review Journal,2007(5):483-514. |
| [3] | Cheol Huh;Chi Woong Choi;Moo Hwan Kim .Elongated bubble behavior during flow boiling in a microchannel[J].Journal of Mechanical Science and Technology,2007(11):1819-1827. |
| [4] | 林曦鹏,柯道友,王颢杰,黄润华,罗喆.微通道局部加热气泡动力学实验研究[J].工程热物理学报,2011(07):1228-1230. |
| [5] | Liaofei Yin,Li Jia,Peng Guan,Fuhao liu.An Experimental Investigation on the Confined and Elongated Bubbles in Subcooled Flow Boiling in a Single Microchannel[J].热科学学报（英文版）,2012(06):549-556. |
| [6] | Peter A. Kew;Keith Cornwell .Correlations for the prediction of boiling heat transfer in small-diameter channels[J].Applied thermal engineering: Design, processes, equipment, economics,1997(8-10):705-715. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%