浮法工艺的优点之一是可以获得极佳的玻璃表面质量,硼硅酸盐浮法玻璃是近年来的研究热点。本文采用原子力显微镜（AFM）研究了温度和时间对硼硅酸盐玻璃浮法成形过程中抛光阶段的影响。研究结果表明：高温抛光过程中时间不是限制玻璃表面抛光质量的决定因素,温度是决定抛光质量的关键。硼硅酸盐浮法玻璃在大于1250℃以上的温度可以快速达到良好的抛光效果。
One of the advantages of float process is the excellent quality of glass surface.Borosilicate float glass is the hot research in recent years.Temperature and time had been researched to indicate how they influence the polishing stage of borosilicate float glass during forming process,the influence was studied by using the atomic force microscopy（AFM）.The results show that the decisive factor influencing surface polishing quality is temperature rather than time.And the borosilicate float glass can achieve good polishing effect quickly when the temperature above 1250℃.
参考文献
| [1] | 徐美君.太阳能玻璃开发应用与市场[J].玻璃与搪瓷,2006(06):57-60. |
| [2] | 徐美君.防火玻璃的生产应用及市场[C].全国第五届浮法玻璃及深加工玻璃技术研讨会论文集,2003:232-239. |
| [3] | T.Kloss;G.Lautenschlager .Advances in the process of floating borosilicate glasses and some recent applications for specialty borosilicate float glasses[J].Glass Technology,2000(6):177-181. |
| [4] | 陈正树.浮法玻璃[M].武汉:武汉工业大学出版社,1997:5-6. |
| [5] | S.Takeda;R.Akiyama;H.Hosono .Precipitation ofnanometer-sized SnO2crystals and Sn depth profile of heat-treated float glass[J].Journal of Non-Crystalline Solids,2002,311:273-280. |
| [6] | Mohammed H. Modi;Gyanendra S. Lodha;Manoj K. Tiwari;Sanjay K. Rai;C. Mukharjee;P. Magudapathy;K.G.M. Nair;Rajendra V. Nandedkar .Ion irradiation damage on tin side surface of float glass[J].Nuclear Instruments and Methods in Physics Research, Section B. Beam Interactions with Materials and Atoms,2005(4):383-390. |
| [7] | 王承遇;陶瑛.玻璃表面处理技术[M].北京:化学工业出版社,2004:33-36. |
| [8] | 西北轻工业学院.玻璃工艺学[M].北京:中国轻工业出版社,2006:25-27. |
| [9] | 赵彦钊;殷海荣.玻璃工艺学[M].北京:化学工业出版社,2006:86-88. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%