采用数值模拟的方法,研究了流道内上下两肋片均布置有涡产生器的扁管管片式散热板芯的传热与阻力特性,并与流道单面布置涡产生器的换热板芯进行了对比.结果表明,采用双面带涡产生器的肋片表面能在提高Nu的同时,降低流动阻力,换热性能得到了明显的提高,在Re=1500时,平均Nu数提高了8.6%,横向平均Nu最大提高了30%,阻力下降了6.5%.
参考文献
| [1] | Fiebig M.Wing Type Vortex Generators for Heat Transfer Enhancement[A].,1986:2909-2913. |
| [2] | L. B. Wang;F. Ke;S. D. Gao .Local and Average Characteristics of Heat/Mass Transfer Over Flat Tube Bank Fin With Four Vortex Generators per Tube[J].Journal of heat transfer: Transactions of the ASME,2002(3):546-552. |
| [3] | 宋克伟,常立民,王良璧.涡干涉的流动显示与数值模拟[J].兰州交通大学学报,2005(06):10-13. |
| [4] | L B Wang;Y H Zhang;Y X Su et al.Local and Average Heat/Mass Transfer Over Flat Tube Bank Fin Mounted in-Line Vortex Generators with Small Longitudinal Spacing[J].Journal of Enhanced Heat Transfer,2002,9(02):77-87. |
| [5] | S. D. Gao;L. B. Wang;Y. H. Zhang;F. Ke .The Optimum Height of Winglel Vortex Generators Mounted on Three-Row Flat Tube Bank Fin[J].Journal of heat transfer: Transactions of the ASME,2003(6):1007-1016. |
| [6] | 陶文铨.数值传热学[M].西安:西安交通大学出版社,2001 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%