绿色环保的聚丙烯（PP）泡沫材料具有优异的物化、力学性能和易再生、易分解等环境友好特性，其研发受到国内外的广泛关注。主要综述了近十年来用于制备PP泡沫材料的发泡成型工艺发展情况，以及PP发泡效果和物理、力学性能的影响因素，并对该领域今后的研究方向进行了展望。
The green and environmental polypropylene （PP） foam material receives extensive interests at home and abroad because of its outstanding physical, chemical and mechanical properties as well as the environmental-friendly feature such as easy reused and decomposed and so on. The development of foaming and molding processes for fabricating PP foam materials and the effect factors of PP foamed effect, physical and mechanical properties are also summarized. The research orientation of the field in the future is also suggested.
参考文献
| [1] | 张旭锋,王澜,景森,卜克明,陈梦.化学交联聚丙烯的性能及其发泡研究[J].中国塑料,2005(11):36-40. |
| [2] | Naguib, HE;Park, CB .A study on the onset surface melt fracture of polypropylene materials with foaming additives[J].Journal of Applied Polymer Science,2008(6):3571-3577. |
| [3] | Nam GJ;Yoo JH;Lee JW .Effect of long-chain branches of polypropylene on rheological properties and foam-extrusion performances[J].Journal of Applied Polymer Science,2005(5):1793-1800. |
| [4] | 杨淑静,宋国君,杨超.硅烷接枝交联法制备发泡用高熔体粘度聚丙烯[J].塑料工业,2006(z1):95-97,108. |
| [5] | 信春玲,洪粲,何亚东.聚丙烯的流变性能及发泡性能研究[J].塑料,2007(01):51-55. |
| [6] | Yousef Jahani;Mehdi Barikani .Rheological and Mechanical Study of Polypropylene Ternary Blends for Foam Application[J].Iranian polymer journal,2005(4):361-370. |
| [7] | 李立星,张卫勤,芦成,林春平,颜研.聚丙烯挤出发泡材料的研究[J].现代塑料加工应用,2008(01):22-25. |
| [8] | 王向东,刘本刚,陈士宏,张玉霞,杜中杰,励杭泉.聚丙烯挤出发泡中的关键技术--加工设备和成型工艺研究[J].中国塑料,2006(04):20-24. |
| [9] | Lee PC;Kaewmesri W;Wang J;Park CB;Pumchusak J;Folland R;Praller A .Effect of die geometry on foaming behaviors of high-melt-strength polypropylene with CO2[J].Journal of Applied Polymer Science,2008(5):3122-3132. |
| [10] | Sahagun CZ;Nunez RG;Rodrigue D .Effects of postextrusion conditions on the morphology of foamed high-density polyethylene/polypropylene blends[J].Journal of Applied Polymer Science,2007(2):1215-1227. |
| [11] | Jae-Jung Hwang;Tadahara Adachi;Takuro Kuwabara .Laminate model expressing mechanical properties of polypropylene foams having non-uniform cell-shape distributions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):369-376. |
| [12] | 张纯,罗筑,于杰,何力,龚维.二次开模注射成型微孔发泡PP工艺及其性能研究[J].中国塑料,2005(08):67-70. |
| [13] | Ming-Cheng Guo;Marie-Claude Heuzey;Pierre J. Carreau .Cell Structure and Dynamic Properties of Injection Molded Polypropylene Foams[J].Polymer engineering and science,2007(7):1070-1081. |
| [14] | 廖永灵,何力,李良,何颖,房春燕,薛兵.温度对微孔发泡PP材料冲击性能的影响[J].塑料工业,2007(11):46-48. |
| [15] | 何颖,周丽,龚维,张纯,罗筑,郝智,何力.微孔发泡聚丙烯（PP）的性能的研究[J].现代机械,2006(03):67-68,101. |
| [16] | R. Pop-Iliev .Processing of Integral-Skin Cellular Polymeric Composites in Rapid Rotational Foam Molding[J].Acta Physica Polonica, A. General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics,2011(2):292-297. |
| [17] | Sho Nakai;Kentaro Taki;Isao Tsujimura;Masahiro Ohshima .Numerical Simulation of a Polypropylene Foam Bead Expansion Process[J].Polymer engineering and science,2008(1):107-115. |
| [18] | Remy Bouix;Philippe Viot;Jean-Luc Lataillade .Polypropylene Foam Behaviour Under Dynamic Loadings: Strain Rate, Density And Microstructure Effects[J].International journal of impact engineering,2009(2):329-342. |
| [19] | Philippe Viot .Hydrostatic compression on polypropylene foam[J].International journal of impact engineering,2009(7):975-989. |
| [20] | 李迎春,谭能超,韩朝昱,邢志光.发泡工艺对交联发泡PP板材性能的影响[J].工程塑料应用,2003(07):25-27. |
| [21] | Liu, H.;Chuai, C.;Iqbal, M.;Wang, H.;Kalsoom, B.B.;Khattak, M.;Qasim Khattak, M. .Improving foam ability of polypropylene by crosslinking[J].Journal of Applied Polymer Science,2011(2):973-980. |
| [22] | 张雯,林剑英,王月香,林为,张华集.一步法交联模压发泡聚丙烯的力学性能[J].高分子材料科学与工程,2011(06):118-121. |
| [23] | Han DH;Jang JH;Kim HY;Kim BN;Shin BY .Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology[J].Polymer engineering and science,2006(4):431-437. |
| [24] | Spitael P;Macosko CW .Strain hardening in polypropylenes and its role in extrusion foaming[J].Polymer engineering and science,2004(11):2090-2100. |
| [25] | Rachtanapun P;Selke SEM;Matuana LM .Effect of the high-density polyethylene melt index on the microcellular foaming of high-density polyethylene/polypropylene blends[J].Journal of Applied Polymer Science,2004(1):364-371. |
| [26] | Zhai WT;Wang HY;Yu J;Dong JY;He JS .Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility[J].Journal of Polymer Science, Part B. Polymer Physics,2008(16):1641-1651. |
| [27] | Xin, C.;He, Y.;Li, Q.;Huang, Y.;Yan, B.;Wang, X. .Crystallization behavior and foaming properties of polypropylene containing ultra-high molecular weight polyethylene under supercritical carbondioxide[J].Journal of Applied Polymer Science,2011(3):1275-1286. |
| [28] | Han-Xiong Huang;Hong-Fei Xu .Preparation of microcellular polypropylene/polystyrene blend foams with tunable cell structure[J].Polymers for advanced technologies,2011(6):822-829. |
| [29] | Kaewmesri W;Rachtanapun P;Pumchusak J .Effect of solvent plasticization microcellular foaming process on polypropylene and foam characteristics[J].Journal of Applied Polymer Science,2008(1):63-70. |
| [30] | Kim, S.G.;Leung, S.N.;Park, C.B.;Sain, M. .The effect of dispersed elastomer particle size on heterogeneous nucleation of TPO with N_2 foaming[J].Chemical Engineering Science,2011(16):3675-3686. |
| [31] | Zhang, P.;Wang, X.-J.;Yang, Y.;Zhou, N.-Q. .Bubble growth in the microcellular foaming of CO_2/polypropylene solutions[J].Journal of Applied Polymer Science,2010(4):1949-1955. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%