欢迎登录材料期刊网

材料期刊网

高级检索

实验研究了RP-3沿流向结焦分布规律以及进口质量流量对其产生的影响.实验将RP-3加压至5 Mpa,使用2.1 m长不锈钢管(1:8 mm I.D.、2.2 mm O.D.、1Cr18Ni9Ti)中将流经其中的RP-3从127℃等热流加温至427℃.在定质量流量前提下,改变进口质量流量0.39、0.78、1.17和1.56 g/(s·mm~2),研究了进口雷诺数对结焦规律的影响.实验结果表明:随着质量流量的增加,RP-3结焦峰值位置逐渐向后推移;管壁平均结焦速率受与进口雷诺数的0.89次方成正比关系;单位质量RP-3结焦生成量随进口雷诺数的增加先减少后增加.

Experiments are performed to study surface coke deposition distribution and the influence of inlet mass velocity.The flowing RP-3 is stressed to 5 MPa,and heated up from 127℃ to 427℃ in a stainless steel tube(1.8 mm I.D.,2.2 mm O.D.,1Cr18Ni9Ti)with a constant heat flux.The influence of inlet Re is investigated with variation of inlet mass velocity of 0.39,0.78,1.17 and 1.56 g/(s·mm~2).The results show that the RP-3 coke peak location shifts downstream as inlet Re increased.the average surface coke deposition rate is directly proportional to the 0.89~(th) power of inlet Re.and coke deposition per mass declines first and then increases as inlet Re increases.

参考文献

[1] Edwards T;Zabarnick S .Supercritical Fuel Deposition Mechanisms[J].Industrial and Engineering Chemistry Re-search,1993,32(12):311-3122.
[2] Jones E G;Balster L M .Impact of Additives on the Au-toxidation of a Thermally Stable Aviation Fuel[J].Energy and Fuels,1997,11(03):610-614.
[3] Orhan Altin;Semih Eser .Analysis of Solid Deposits from Thermal Stressing of a JP-8 Fuel on Different Tube Surfaces in a Flow Reactor[J].Industrial & Engineering Chemistry Research,2001(2):596-603.
[4] Smith J D .Fuel for the SST:Effects of Deposits on Heat Transfer to Aviation Kerosene[J].Industrial and Engineer-ing Chemistry Process Design and Development,1969,8:229.
[5] Peat A E.Thermal Decomposition of Aviation Fuels in Jet Engine Injector Feed-Arms:Part I-Results from a Full-Scale Rig[A].Tokyo Japan,1987
[6] Clark R H;Thomas L.An Investigation of the Physical and Chemical Factors Affecting the Performance of Fuels in the JFTOT[A].Anaheim,California,USA,1988
[7] L.J. Spadaccini;D.R. Sobel;H. Huang .Deposit Formation and Mitigation in Aircraft Fuels[J].Journal of engineering for gas turbines and power: Transactions of the ASME,2001(4):741-746.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%