采用CFD方法对水在矩形光滑微通道内的流动和传热特性进行了数值模拟.计算结果表明微通道的长径比、当量直径、高宽比和孔隙率都对其流动和传热有着不同程度的影响.在保持长径比大于70而使流动的入口效应可忽略的前提下,分别模拟了当量直径,高宽比和孔隙率对微通道流动和传热的影响,得到了各种工况下的流动和传热规律.
参考文献
| [1] | Wu P;Little WA .Measurement of Friction Factors for the Flow of Gases in Very Fine Channels Used for Microminiature Joule-Thomson Refrigerators[J].Cryogenics,1983,23(05):273-277. |
| [2] | Wu P;Little WA .Measurement of Heat Transfer Characteristics of Gas Flow in Very Fine Channels Used for Microminiature Joule-Thomson Refrigerators[J].Cryogenics,1984,24(08):415-420. |
| [3] | X F Peng;G P Peterson .Convective Heat Transfer and Flow Friction in Microchannel Structures[J].International Journal of Heat and Mass Transfer,1996,39(12):2599-2608. |
| [4] | H.Y. Wu;Ping Cheng .Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios[J].International Journal of Heat and Mass Transfer,2003(14):2519-2525. |
| [5] | H B Ma;G P Peterson .Laminar Friction Factor in Microscale Ducts of Irregular Cross Section[J].Microscale Thermophy Eng,1997,1(03):253-265. |
| [6] | M N Ozisik.Heat Transfer:A Basic Approach[M].New York:McGraw-Hill,1985 |
| [7] | 杨世铭;陶文铨.传热学[M].北京:高等教育出版社,2003 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%