欢迎登录材料期刊网

材料期刊网

高级检索

本文对应用于二氧化碳跨临界空调制冷循环的三排管小管径开缝翅片管换热器空气侧的传热及阻力性能进行了实验与数值研究,数值模拟结果与实验值的最大偏差仅为10%.此外,通过四种途径研究了倾角对换热的影响,发现倾角有利于换热强化但换热量的增加不及压降的增加.

Heat transfer and fluid flow characteristics on the air side in three-row slotted fin-and-tube heat transfer surfaces with small diameters applied in a trans-critical CO_2 air--conditioning or refrigeration cycle are studied experimentally and numerically.AU the numerical results are in agreement with the related test data within 10%deviation.Besides,influences of a slotted inclination angle on heat transfer are analyzed with four difierent methods.It iS found that the slotted inclination angle could enhance heat transfer with more evident pressure drop.

参考文献

[1] 李惠珍;康海军;辛荣昌.开缝翅片管换热器传热和阻力特性实验研究[A].杭州:浙江大学出版社,1992:277-280.
[2] Chi-Chuan Wang;Wei-Song Lee;Wen-Jenn Sheu .A comparative study of compact enhanced fin-and-tube heat exchangers[J].International Journal of Heat and Mass Transfer,2001(18):3565-3573.
[3] Jeom-Yul Yun;Kwan-Soo Lee .Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins[J].International Journal of Heat and Mass Transfer,2000(14):2529-2539.
[4] 康海军;李妩;李惠珍 等.平直翅片管换热器传热和阻力特性的实验研究[J].西安交通大学学报,1994,28(01):91-98.
[5] 杨世铭;陶文铨.传热学[M].北京:高等教育出版社,1998:313319.
[6] Shah RK.Compact Heat Exchanger Surface Selection Methods[M].Toronto,Canada,1978:193-199.
[7] 陶文铨.数值传热学[M].西安:西安交通大学出版社,2001
[8] Qu Z G;Tao W Q;He Y L .Three Dimensional Numerical Simulat ion on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surfaces with X-Arrangement of Strips[J].ASME Journal of Heat Transfer,2004,126(04):697-707.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%