纳米TiO2耐蚀性能优良,采用溶胶-凝胶工艺、浸渍-提拉法在铝合金表面涂覆纳米TiO2复合涂层,并将涂层在不同温度下热处理,研究了热处理温度对纳米TiO2复合涂层耐蚀性能的影响.结果表明:100℃热处理的复合涂层的耐蚀性最佳,在3.5%NaCl溶液中腐蚀电流密度比铝合金基体降低了4个数量级,在基体表面形成了均匀的保护膜,对基体形成了良好的防护.
参考文献
[1] | 余家国;赵修建;叶晓川.溶胶-凝胶法制备TiO2纳米薄膜及其光催化性能[J].光学技术,1998(07):17-19. |
[2] | 张彭义,余刚,蒋展鹏.固定化二氧化钛膜的制备及其光催化性能[J].中国环境科学,2000(05):436-440. |
[3] | 沈杭燕,张晋霞,唐新硕.TiO2膜光催化剂的改进及表征[J].化学物理学报,2001(04):497-500. |
[4] | 宋来洲,高志明,宋诗哲.人工神经网络优化碳钢表面TiO2修饰膜制备工艺[J].中国腐蚀与防护学报,2001(02):101-105. |
[5] | 潘建平.溶胶-凝胶法制备薄膜涂层的技术与应用[J].腐蚀与防护,2001(08):339-342. |
[6] | 李青,黄元龙.溶胶-凝胶法与金属表面改性[J].腐蚀科学与防护技术,1997(03):214. |
[7] | 李澄,周一扬,黄明珠.SiO2-TiO2-ZrO2涂层的制备及其特性[J].材料保护,2002(05):7-9. |
[8] | Tan ALK;Soutar AM;Annergren IF;Liu YN .Multilayer sol-gel coatings for corrosion protection of magnesium[J].Surface & Coatings Technology,2005(1/3):478-482. |
[9] | Ralf Supplit;Thomas Koch;Ulrich Schubert .Evaluation of the anti-corrosive effect of acid pickling and sol-gel coating on magnesium AZ31 alloy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2007(7):3015-3023. |
[10] | 李恒,李澄.纳米SiO2杂化涂层对铝合金耐腐蚀性能的影响[J].涂料工业,2010(09):25-28,33. |
[11] | 曹楚南;张鉴清.电化学交流阻抗谱导论[M].北京:科学出版社,2002:10-12. |
[12] | Zhang Q G;Liu Q L;Jiang Z Y et al.Effects of annealing on the physico-chemical structure and permeation performance of novel hybrid membranes of poly (vinyl alcohol)/ γ-aminopropyl-triethoxysilane[J].Microporous and Meso-porous Materials,2008,110(2-3):379-391. |
[13] | Hashem KME. .Study of TEOS and TPOS anticorrosion coatings developed at different ranges of pyrolysis temperatures[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2003(1/4):302-313. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%