在Gleeble-1500热模拟机上,当变形温度为300～500 ℃、应变速率为0.01～10 s-1、真应变为0～0.8时,采用圆柱体等温热压缩实验研究5083铝合金变形流变应力行为.通过分析流变应力指数函数中系数A、β与应变的关系,建立Zener-Hollomon参数的指数关系本构方程.运用该本构方程对5083铝合金不同应变速率、变形温度及应变条件下的流变应力进行预测,发现流变应力预测值与温升修正值吻合得相当好.
参考文献
| [1] | E. Cerri;E. Evangelista .Overview Of The High Temperature Substructure Development In Al-Mg Alloys[J].HIGH TEMPERATURE MATERIALS AND PROCESSES,1999(4):227-240. |
| [2] | Gronostajski Z.; .The constitutive equations for FEM analysis[J].Journal of Materials Processing Technology,2000(1/3):40-44. |
| [3] | 林高用,张辉,郭武超,彭大暑.7075铝合金热压缩变形流变应力[J].中国有色金属学报,2001(03):412-415. |
| [4] | 张新明,陈健美,邓运来,肖阳,蒋浩.Mg-Gd-Y-Zr耐热镁合金的压缩变形行为[J].中国有色金属学报,2005(12):1925-1932. |
| [5] | 李慧中,张新明,陈明安,周卓平.2519铝合金热变形流变行为[J].中国有色金属学报,2005(04):621-625. |
| [6] | 刘万辉,鲍爱莲.热压缩7075铝合金流变应力特征[J].热加工工艺,2006(08):28-30. |
| [7] | M. Zhou;M.P. Clode .Constitutive equations for modelling flow softening due to dynamic recovery and heat generation during plastic deformation[J].Mechanics of materials,1998(2):63-76. |
| [8] | Carmona R;Zhu Q;Sellars CM;Beynon JH .Controlling mechanisms of deformation of AA5052 aluminium alloy at small strains under hot working conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):157-163. |
| [9] | H.J.McQueen;J.Belling .Alloy 5005: hot workability in relation to other Al-Mg alloys[J].Materials Science Forum,2000(1):539-544. |
| [10] | ZHANG Hui,PENG Da-shu,YANG Li-bin,MENG Li-ping.Flow stress equation for multipass hot-rolling of aluminum alloys[J].中南工业大学学报(英文版),2001(01):13-17. |
| [11] | 沈键 .2091铝锂合金高温塑性变形行为研究[D].中南工业大学,1996. |
| [12] | Baragar D L .The high temperature and high strain rate behavior of a plain carbon and an HSLA steel[J].Journal of Mechanical Working and Technology,1987,14:295-307. |
| [13] | Devadas C;Baragar D;Ruddle G;Samarasekera I V .Thermal and metallurgical state of steel strip during hot rolling:Part Ⅱ.Factors influencing rolling loads[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22(02):321-333. |
| [14] | McQueen HJ.;Ryan ND. .Constitutive analysis in hot working[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1-2 Special Issue SI):43-63. |
| [15] | 张辉,彭大暑,杨立斌,孟力平.铝合金多道次热轧流变应力的研究[J].热加工工艺,2000(05):6-8. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%