建立了吹氩板坯结晶器水模型内气泡运动行为的数学模型.以水模型实验获得的整个结晶器内各气泡尺寸和数量浓度为气泡的初始条件,对不同尺寸气泡的运动行为进行数值模拟.结果表明:当水流量为2.54 m3/h,气流量为0.037m3/h,水口浸入深度为78 mm时,气泡都分布在上回流区,没有卷入下回流区.较大的气泡在水口附近上浮,较小的气泡在距离水口较远的区域上浮.这和实验结果相吻合.
参考文献
| [1] | Thomas BG.Modeling for casting and solidification processing[M].New York:Yu O and Marcel Dekker Editor,2001 |
| [2] | Lifeng ZHANG;Brian G. THOMAS .State of the Art in Evaluation and Control of Steel Cleanliness[J].ISIJ International,2003(3):271-291. |
| [3] | Simulation of argon gas flow effects in a continuous slab caster[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1994,25B(04):527-547. |
| [4] | Brian G. Thomas .Behavior of argon bubbles during continuous casting of steel[J].Steelmaking Conference Proceedings,1997(0):375-384. |
| [5] | Thomas BG.Modeling for casting and solidification processing[M].New York:Yu O and Marcel Dekker Editor,2001 |
| [6] | C. Pfeiler;M. Wu;A. Ludwig .Influence of argon gas bubbles and non-metallic inclusions on the flow behavior in steel continuous casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):115-120. |
| [7] | 沈铁.结晶器Ar气泡运动行为模拟研究[J].热加工工艺,2011(01):69-71. |
| [8] | Noriko KUBO;Toshio ISHII;Jun KUBOTA;Norichika ARAMAKI .Two-phase Flow Numerical Simulation of Molten Steel and Argon Gas in a Continuous Casting Mold[J].ISIJ International,2002(11):1251-1258. |
| [9] | 倪冰,林媛,罗志国,狄瞻霞,邹宗树.板坯连铸结晶器水模内气泡运动的实验研究[J].材料与冶金学报,2008(04):249-253,257. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%