阐述了高强铝合金的微观结构及其与性能之间的关系,从材料自身和热处理工艺两方面介绍了强韧化制度,并介绍了当前比较成熟的制备Al-Zn-Mg-Cu系合金的新技术、喷射成形及金属基复合材料的制备,就今后的研究开发提出了一些建议.
The relations between the microstructure and property of high strength aluminum alloy are stated.The primary system of toughness and tenacity are introduced mainly from the material itself and the heat treatment process. More mature current preparation of Al-Zn-Mg-Cu alloy of the new technologies, spray forming and metal matrix composites preparation are stated. Some advices about research and development for the future are put forward.
参考文献
| [1] | 宋仁国.高强度铝合金的研究现状及发展趋势[J].材料导报,2000(01):20-21,34. |
| [2] | 蒙多尔福L F;王祝堂.铝合金的组织与性能[M].北京:冶金工业出版社,1984 |
| [3] | 张勤,崔建忠,路贵民,张北江.7075铝合金CREM铸锭的微观组织[J].材料导报,2002(01):61-63,50. |
| [4] | 李念奎,崔建忠.Al-Zn-Mg-Cu系合金组织对性能的影响[J].轻合金加工技术,2008(01):5-10,54. |
| [5] | 阎大京 .7475和7050铝合金PFZ的形成特点及其对性能的影响[J].材料科学与工艺,1993,1(01):40. |
| [6] | 甘卫平,范洪涛,许可勤,周兆锋.Al-Zn-Mg-Cu系高强铝合金研究进展[J].铝加工,2003(03):6-12. |
| [7] | Tatsuo S et al.Effects of Si and Ti additions on the nucleation and phase stability of the L12-type Al3Zr Phase in AlZr alloys[J].Materials Science Forum,1996,217-222:895. |
| [8] | 肖于德;谢允安;李松瑞 .耐热铝合金及其热稳强化相[J].铝加工,1994,17(04):24. |
| [9] | 王祝堂;田荣璋.铝合金及其加工手册[M].长沙:中南工业大学出版社,1989 |
| [10] | 谢优华,杨守杰,戴圣龙,陆政.含锆超高强铝合金的研究及发展概况[J].材料导报,2002(05):8-10. |
| [11] | Robson J D;Pregnell P B .Predicting recrystallised volume fraction in alum inium alloy 7050 hot rolled plate[J].Materials Science and Technology,2002,18(06):607. |
| [12] | Keith E. Knipling;David C. Dunand;David N. Seidman .Criteria for developing castable, creep-resistant aluminum-based alloys - A review[J].Zeitschrift fur Metallkunde,2006(3):246-265. |
| [13] | Filatov Y A;Yelagin V I;Zakharov V V .New Al-Mg-Sc alloys[J].Materials Science and Engineering,2000,A280(01):97. |
| [14] | Zhimin Yin;Qinglin Pan;Yonghong Zhang;Feng Jiang .Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):151-155. |
| [15] | Alexander P;Joachim G;Rainer S F .Application of computation thermochemistry to Al and Mg alloy processing with Sc additions[J].Material Science and Engineering,2000,A289(09):123. |
| [16] | 柏振海,尹振兴,罗兵辉.Al-Mg-Sc合金铸态组织观察[J].轻合金加工技术,2003(01):7-9,14. |
| [17] | David N. Seidman;Emmanuelle A. Marquis;David C. Dunand .Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys[J].Acta materialia,2002(16):4021-4035. |
| [18] | 戴晓元,夏长清,吴安如,王杰文,李杨勇.含钪超高强铝合金的研究现状及发展趋势[J].材料导报,2006(05):104-107. |
| [19] | Yelaginv I;Zakhanov V V;Rostova T D .Aluminum alloys alloying with scadium[J].Metal Sci Heat Treatment(USSR),1992,60(01):24. |
| [20] | Toropava L S;Kamardin Kin A N .Investigation of alloys of the Al-Sc-Zr system in the aluminium-rich ranges[J].Phys Metals Metall,1990,70(06):106. |
| [21] | ЕлагинВИ;ЭахаровВВ;谢燮揆 .用钪合金化的铝合金[J].轻金属,1993,14(03):54. |
| [22] | 杨军军,徐国富,聂祚仁,尹志民.微量Er对高强铝合金组织与性能的影响[J].特种铸造及有色合金,2006(07):393-396. |
| [23] | 阮海琼 .稀土元素Er在Al-Zn-Mg合金中的作用[D].北京:北京工业大学,2004. |
| [24] | SONG Min,CHEN Kang-hua,HUANG Lan-ping.Effects of Ag addition on mechanical properties and microstructures of Al-8Cu-0.5Mg alloy[J].中国有色金属学会会刊（英文版）,2006(04):766-771. |
| [25] | 王祝堂;田荣璋.铝合金及加工手册[M].长沙:中南工业大学出版社,2000 |
| [26] | 朱兆军 .高强韧铸造Al-Si合金组织和性能的研究[D].哈尔滨工业大学,2003. |
| [27] | 汝继刚,伊琳娜.高纯化对Al-Zn-Mg-Cu系高强铝合金性能的影响[J].航空材料学报,2003(z1):5-7. |
| [28] | 陈康华,刘红卫,刘允中.强化固溶对7055铝合金力学性能和断裂行为的影响[J].中南工业大学学报(自然科学版),2000(06):528-531. |
| [29] | 林高用,杨伟,孙利平,彭大暑.Al-Zn-Mg-Cu-Cr合金厚板组织细化[J].中国有色金属学报,2008(08):1432-1439. |
| [30] | 潘志军,黎文献,马正青,谭敦强.高强铝合金的研究现状及展望[J].铝加工,2001(04):39-41. |
| [31] | 彭超群.喷射成形技术[M].长沙:中南大学出版社,2004 |
| [32] | 张永安,熊柏青,韦强,朱宝宏,刘红伟,石力开.喷射成形制备Al-Zn-Mg-Cu系高强高韧铝合金的研究[J].稀有金属,2002(06):425-428. |
| [33] | 韦强,熊柏青,张永安,朱宝宏,石力开.喷射成形Al-Zn-Mg-Cu系高强铝合金的组织与性能[J].中国有色金属学报,2001(02):279-283. |
| [34] | 杨林,田冲,陈桂云,赵九洲,张永昌,叶恒强.喷射沉积AlZn12Mg2Cu2合金的组织结构及力学性能[J].材料工程,2002(02):23-26. |
| [35] | 潘复生;张丁非.铝合金及应用[M].北京:化学工业出版社,2006 |
| [36] | 陶杰;赵玉涛;潘蕾.金属基复合材料制备新金属导论[M].北京:化学工业出版社,2007 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%