利用激光重熔技术对超音速火焰喷涂(HVOF)涂层进行改性处理,可改善涂层质量.采用HVOF技术在低碳钢表面喷涂Cr3C2-NiCr层,然后对其进行激光重熔处理,考察了熔覆后涂层的冲蚀性能.结果表明:HVOF层激光重熔后以不同角度冲蚀,30°冲蚀时冲蚀率最大,表现为塑性材料的冲蚀性能;激光重熔HVOF层在冲蚀初期冲蚀率较大,随着冲蚀次数的增加,冲蚀率降低,冲蚀性能最终优于低碳钢和HVOF层;HVOF层激光重熔后致密性提高.
参考文献
| [1] | Qiao Y F;Liu Y R;Fischer T E .Sliding and abrasive wear resistance of thermal-sprayed WC-Co coatings[J].Journal of Thermal Spray Technology,2001,10(01):118-125. |
| [2] | 纪岗昌,王豫跃,李长久,园家启嗣.超音速火焰喷涂Cr3C2-NiCr涂层的冲蚀磨损特性[J].西安交通大学学报,2000(05):59-63. |
| [3] | 纪岗昌,李长久,王豫跃,圆田启嗣.喷涂工艺条件对超音速火焰喷涂Cr3C2-NiCr涂层冲蚀磨损性能的影响[J].摩擦学学报,2002(06):424-429. |
| [4] | Yun Soo Lim .Microscopic investigation of sensitized Ni-base alloy 600 after laser surface melting[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1997(5):1223-1231. |
| [5] | Tjong S C;Tsang H C .Laser surface melting of an austenitic Fe-26Mn-7Al-0.9C alloy[J].Surface and Coatings Technology,1993,57:139-144. |
| [6] | Ramous E .A note on rapid surface melting by laser[J].Journal of Materials Processing Technology,1996,57:1-3. |
| [7] | Rao D R K;Venkataraman B;Asundi M K et al.The effect of laser surface melting on the erosion behavior of a low alloy steel[J].Surface and Coatings Technology,1993,58:85-92. |
| [8] | Zhu J P.Surface Strengthening Technique of Metals[M].Beijing:Beijing Mechanical Industry Press,1989:175. |
| [9] | 陆益军,张京贤,王萍,贺子义,胡冰,林萍华,谢国治.激光重熔等离子喷涂NiCr-Cr3C2涂层的工艺优化[J].应用激光,2006(05):329-332. |
| [10] | Masumoto I;Chen G Q .Effect of laser remelting on the microstructure and properties of the plasma sprayed Cr3C2-NiCrBSi coatings[J].Journal of Zhenjiang Shipbuilding Institute,1989,3(02):74-82. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%