At great depth ratio,two methodologies based on the representative strain were improved to extract mechanical properties of metallic engineering structural materials from P-h curve of an indentation response.The improved aspects include:the combination of great ratio h1/R=0.1 and h2/R=0.4 replaced h1/R=0.01 and h2/R=0.06(Cao＇s method) and h1/R=0.1 and h2/R=0.3 (Ogasawara＇s method); three types of metallic engineering structural materials with obviously different elastic modulus were dealt with to get their calculation parameters,respectively; a new parameter reflecting the effect of work-hardening exponent n was introduced to get the dimensionless function which is independent of n and a relationship between W/(h3σrS)and E*/(σrS) at great depth ratio.By using the results of finite element simulation,the efficiency and accuracy of the improved method have been proved,and it showed that the accuracy of the improved method is much better than the former method.
参考文献
| [1] | J. Gubicza;A. Juhasz;J. Lendvai .A new method for hardness determination from depth sensing indentation tests[J].Journal of Materials Research,1996(12):2964-2967. |
| [2] | M. DAO;N. CHOLLACOOP;K. J. VAN VLIET .COMPUTATIONAL MODELING OF THE FORWARD AND REVERSE PROBLEMS IN INSTRUMENTED SHARP INDENTATION[J].Acta materialia,2001(19):3899-3918. |
| [3] | Y.J. Park;G.M. Pharr .Nanoindentation with spherical indenters: finite element studies of deformation in the elastic-plastic transition regime[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1):246-250. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%