欢迎登录材料期刊网

材料期刊网

高级检索

利用二次离子质谱、激光拉曼、电子背散射衍射及透射电镜等仪器,观察并研究了海洋平台用含砷热轧H型钢低温韧性的影响因素,并提出相应的控制技术.结果表明,显微组织、夹杂物和亚微米结构等都不是影响低温韧性的主要因素;发现了砷在晶界偏聚,晶界上As含量约为基体的10倍.采用本文生产线及生产工艺,分析不同的As含量对热轧H型钢冲击功的影响,结果表明钢中As含量控制在0.015%以下不会影响其低温韧性.

参考文献

[1] 李明漪,李化斌,夏利萍,赵焕河.浅析砷对炼钢熔炼分析的影响及对碳素结构钢性能的危害[J].冶金标准化与质量,2004(02):11-12.
[2] Zhu Y Z;Li J C;Liang D M et al.Distribution of arsenic on micro-interfaces in a kind of Cr,Nb and Ti microalloyed low carbon steel produced by a compact strip production process[J].Materials Chemistry and Physics,2011,130(1):524-530.
[3] Zhu Y Z;Li B L;Liu P .Effect of annealing and hot rolling on grain boundary segregation of arsenic in a Mn-steel microalloyed by Ti,Cr and Nb[J].Journal of Iron and Steel Research International,2013,20(9):67-72.
[4] 耿明山,项利,王新华,张炯明,肖寄光.残余元素对连铸坯和热轧板表面质量的影响[J].钢铁研究学报,2009(05):19-21.
[5] 刘永华,张金柱.钢中稀土铈与砷相互作用研究[J].现代机械,2010(05):87-88,90.
[6] 董元篪;魏寿昆;彭育强 等.Fe-As-C-j熔体中As活度的研究[J].金属学报,1986,22(6):537-539.
[7] Yuan-zhi Zhu,Jian-ping Xu.A method to study interface diffusion of arsenic into a Nb-Ti microalloyed low carbon steel[J].矿物冶金与材料学报,2012(09):821-826.
[8] 殷国瑾 .砷在钢中的分布[J].钢铁,1981,16(2):20-28.
[9] Wang K;Yang C;Si H .Effect of non-equilibrium grain-boundary segregation of phosphorus on the intermediate-temperature ductility minimum of a Fe-17Cr alloy[J].Materials Science and Engineering A,2013,587(10):228-232.
[10] Briant C L .Competitive grain boundary segregation in Fe-P-S and Fe-P-Sb alloys[J].Acta Metallurgical,1988,36(7):1805-1813.
[11] J. Janovec;A. Vyrostkova;P. Sevc;J. S. Robinson;M. Svoboda;J. Krestankova;H. J. Grabke .Precipitation related anomalies in kinetics of phosphorus grain boundary segregation in low alloy steels[J].Acta materialia,2003(14):4025-4032.
[12] 许达,俞峰,罗迪.影响高速钢韧性的因素[J].钢铁研究学报,2006(11):1-6.
[13] 刘富有 .残余元素的表面富集与晶界氧化[J].金属学报,1978,14(3):310-315.
[14] 程慧静,王福明,李长荣,谭燕萍,王建军.砷对45钢组织及力学性能的影响[J].金属热处理,2010(02):33-38.
[15] Kameda J;Nishiyama Y .Combined effects of phosphorus segregation and partial intergranular fracture on the ductile-brittle transition temperature in structural alloy steels[J].Materials Science and Engineering A,2011,528(10):3705-3713.
[16] Lan Y;Seetharaman S .Effects of residual elements arsenic,antimony,and tin on surface hot shortness[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,2011,42B(5):1031-1043.
[17] 康永林,于浩,王克鲁,傅杰,柳得橹,王中丙,毛新平,陈贵江.CSP低碳钢薄板组织演变及强化机理研究[J].钢铁,2003(08):20-26.
[18] Pavel L;Mojmir S;Vaclav P et al.Why calculated energies of grain boundary segregation are unreliable when segregant solubility is low[J].Scripta Materialia,2013,68(8):547-550.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%