介绍了一种短流程无缝不锈钢管材的制备工艺,即用空心铸坯直接热挤压制备荒管.对铸坯热挤压荒管的组织和性能的研究结果表明:采用此新工艺可获得组织和性能均与传统工艺水平相当的不锈钢荒管,而且新工艺比传统工艺流程短、生产成本低.
参考文献
| [1] | 刑瑞祯.我国不锈钢管厂技术改造探讨[J].钢管,1996(01):1-3. |
| [2] | 介万奇;周尧和 .柱状晶向等轴晶转变过程的模拟研究[J].西北工业大学学报,1988,6(01):29-40. |
| [3] | Jackson K A;Hunt J D;Uhlman D R et al.On the Origin of the Equiaxed Zone in Casting[J].Tms-Aime,1966,236(02):149-158. |
| [4] | S S葛列里克.金属和合金的再结晶[M].北京:机械工业出版社,1985 |
| [5] | Kenzo Karo;Yoshihiro Saito;Tetsuo Sakai .Investigation of Recovery and Recrystallization During Hot Rolling of Stainless Steel With High Speed Laboratory Mill[J].Transactions of the Iron and Steel Institute of Japan,1984,24:1050-1054. |
| [6] | Ryan N D;Mcpueen H J;Jonas J J .The Deformation Behavior of Types 304,316 and 317 Austenitic Stainless Steel During Hot Torsion[J].Canadian Metallurgical Quarterly,1983,22(03):369-378. |
| [7] | Tadashi Maki;Koichi Akasaka;Koji Okuno .Dynamic Recrystallization of Austenite in 18-8 Stainless Steel and 18Ni Maraging Steel[J].Transactions of the Iron and Steel Institute of Japan,1982,22:253-261. |
| [8] | Chiaki Ouchi;Tomoyoshi Okita .Dynamic Recrystallization Behavior of Austenite in Nb-Bearing High Strength Low Alloy Stainless Steel[J].Transactions of the Iron and Steel Institute of Japan,1982,22:543-551. |
| [9] | Ryan N D;Mcqueen H J .Dynamic Softening Mechanism in304 Austenitic Stainless Steel[J].Canadian Metallurgical Quarterly,1990,29(02):147-162. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%