碳化硼断裂韧性低、烧结温度高、抗氧化能力差、对金属的稳定性差,限制了其在工程上的进一步应用.综述了碳化硼粉末的成型方法以及碳化硼基复合材料的烧结方法,总结了碳化硼陶瓷的增韧及烧结过程中的氧化行为.
参考文献
| [1] | 刘明朗,韩增尧,郎静,马南钢,吴骁行.碳化硼-铝复合材料的研究进展[J].材料导报,2011(23):31-34. |
| [2] | 丁硕,温广武,雷廷权.碳化硼材料研究进展[J].材料科学与工艺,2003(01):101-105. |
| [3] | 李圆圆,朱常桂,代胜平,杨静,乔慧武.橡胶模成型和真空烧结制备碳化硼锆合金[J].机械工程材料,2012(08):51-54. |
| [4] | 王小锋,王日初,彭超群,罗玉林,王志勇.凝胶注模的凝胶反应动力学和均匀性[J].中南大学学报（自然科学版）,2012(04):1281-1289. |
| [5] | 夏丰杰,黄翔,尹衍升.碳化硼陶瓷凝胶注模成型工艺研究[J].材料开发与应用,2008(04):40-42,46. |
| [6] | 武七德,刘开松,屠隆,李娜.成型方式对反应烧结碳化硅显微结构及强度的影响[J].陶瓷学报,2011(03):407-411. |
| [7] | 王零森;杨义斌;张金生 等.碳化硼烧结动力学和烧结机制[J].中南工业大学学报,1999,30(5):505. |
| [8] | Ma Qiancheng;Zhang Guojun;Kan Yanmei et al.Effect of additives introduced by ball milling on sintering behavior and mechanical properties of hot-pressed B4C[J].CERAMICS INTERNATIONAL,2010,36(1):167. |
| [9] | 尹邦跃,王零森.热压烧结B4C陶瓷的物理性能研究[J].原子能科学技术,2004(05):429-431. |
| [10] | 岳新艳,应伟峰,喻亮,茹红强.B_4C陶瓷材料的无压烧结与性能[J].东北大学学报（自然科学版）,2010(01):56-59. |
| [11] | Wei Rubin;Zhang Yujun;Zhang Yan et al.The effect of rare-earth oxide additive on the densification of pressureless sintering B4 C ceramic[J].CERAMICS INTERNATIONAL,2013,39(6):6449. |
| [12] | Lee BS.;Kang S. .Low-temperature processing of B4C-Al composites via infiltration technique[J].Materials Chemistry and Physics,2001(1/3):249-255. |
| [13] | Shmuel Hayun;Amir Weizmann;Moshe P. Dariel .Microstructural evolution during the infiltration of boron carbide with molten silicon[J].Journal of the European Ceramic Society,2010(4):1007-1014. |
| [14] | 章嵩 .SPS反应烧结碳化硼[D].武汉:武汉理工大学,2007. |
| [15] | Bonomol I;Loboda P;Sakka Y et al.Hard polycrystalline eutectic composite prepared by spark plasma sintering[J].CERAMICS INTERNATIONAL,2012,38:3947. |
| [16] | Anthony Thuault;Sylvain Marinel;Etienne Savary .Processing of reaction-bonded B_4C-SiC composites in a single-mode microwave cavity[J].CERAMICS INTERNATIONAL,2013(2):1215-1219. |
| [17] | Sairam K;Sonber J K;Subramanian C et al.Development of B4C-HfB2 composites by reaction hot pressing[J].Metals Hard Mater,2012,35:32. |
| [18] | 刘志刚 .Al<,2>O<,3>/ZrO<,2>陶瓷复合材料的制备和强韧化机理研究[D].中国海洋大学,2009. |
| [19] | Xu Jingyu;Cao Hui;Gao Bo et al.Microstructures and mechanical properties in B4C-CeO2 ceramic[J].Journal of Nuclear Materials,2011,417:663. |
| [20] | Wang Yujin;Ye Feng;Zbou Yu et al.Effect of TiB2 content on microstructure and mechanical properity of in-situ fabricate TiB2/B4C composite[J].Transactions of Nonferrous Metals Society of China,2011,21:369. |
| [21] | Brenner S.Facters influencing the strength of whiskers in fiber composite materials[M].New York:American Society for Metals,1965:11. |
| [22] | 魏红康,张玉军,邓翔宇.SiCw增强B4C陶瓷复合材料的制备与性能研究[J].材料工程,2010(z2):99-102. |
| [23] | 邓建新,张希华.B4C/SiCw陶瓷喷砂嘴的制备及其冲蚀磨损机理研究[J].硅酸盐通报,2004(03):18-20. |
| [24] | 夏生兰 .碳化硼的氧化[J].核动力工程,1988,9(5):80. |
| [25] | 吴芳,王零森,张金生,樊毅,刘伯威,高游.热压碳化硼氧化行为及其对摩擦特性的影响[J].硅酸盐学报,2001(01):44-48. |
| [26] | Xu Changming et al.Spark plasma sintering of B4C ceramics:The effects of milling medium and TiB2 addition[J].Int J Refractory Metals Hard Mater,2012,30(1):139. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%