The manual selection of environment parameters during welding simulation will bring a significant error to the simulation result of welding temperature field. By a combination of finite element method (FEM) and infrared thermography, these environment parameters were inversed mathematically in place of previous manual selection. First, FEM model of the welding process was constructed, and the temperature field was computed with initial environment parameters.Then, a real welding process was conducted and the temperature field was measured by infrared thermography. Last, the simulation and measurement results were compared, and the environment parameters were adjusted continuously with the genetic algorithm(GA) until the simulation matched the measurement best. Parameters according to the best-matched simulation results were considered as the most appropriate parameters.
参考文献
| [1] | J Mackerle .[J].Modelling and Simulation in Materials Science and Engineering,2002,10:295. |
| [2] | X. S. Liu;H. Y. Fang;W. L. Xu .NUMERICAL SIMULATION OF CONTROLLING IN TITANIUM ALLOY SHEETS WELDING RESIDUAL STRESS BY TRAILING PEENING[J].Acta metallurgica Sinica,2004(3):311-316. |
| [3] | G H Little;A G Kamtekar .[J].Computers and Structures,1995,68:157. |
| [4] | X.K. Zhu;Y.J. Chao .Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel[J].Journal of Materials Processing Technology,2004(2):263-272. |
| [5] | A De;T DebRoy .[J].Journal of Physics D:Applied Physics,2004,37:140. |
| [6] | S.G. Lambrakos;J.O. Milewski;P.G. Moore .Weld Analysis Using an Inverse-Problem Approach Based on Quasi-One-Dimensional Interpolation[J].JOM,2003(6):27-36. |
| [7] | Editorial Committee of Handbook of Engineering Materials.Engineer Materials Practical Handbook[M].北京:中国标准出版社,1989:70. |
| [8] | W Y Zhang.Study of Heat Transfer in Welding[M].北京:机械工业出版社,1989:173. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%